owners manual Seat Alhambra

all ratings: 0 average rating: 5

Checking and refilling levels Brake fluid specifications s ● When refilling liquids, avoid spilling themBrake fluid on parts of the engine and the exhaust sys- SEAT have developed a special brake fluid ation tem. Spilled liquids could cause a fire. Under optimised for the brake systems of their vehi-ific Checking the brake fluid level specific circumstances, the ethylene glycol cles. To ensure the optimum working of the pec can catch fire. s brake system, SEAT recommends the use of al brake fluid in accordance with the VW 501 14 hnic CAUTION standard. If this brake fluid is not available or ec T another brake fluid is used for different rea- ● Only fill with distilled water. Any other type sons, use a brake fluid that complies with the of water may lead to considerable rusting in United States standard FMVSS 116 DOT 4 or the engine due to its chemical components. the German standard DIN ISO 4925 CLASS 4 This could consequently damage the engine. e ››› . ic If you have not used distilled water but an- other type of water to top up the coolant, a Adv Brake fluids conforming to the standard specialised workshop must immediately re- VW 501 14, fulfil the American requirements place all of the fluid in the engine cooling Fig. 170 In the engine compartment: brake of the FMVSS 116 DOT 4 standard and the system. fluid reservoir cap German DIN ISO 4925 CLASS 4 standard. ● Only top up coolant to the top level of the However, fluids that comply with the US marked area ››› Fig. 168. Otherwise the ex- In the course of time, the brake fluid absorbs FMVSS 116 DOT 4 standard or the German cess coolant will be forced out of the cooling water from the ambient air. If there is too DIN ISO 4925 CLASS 4 standard do not nec- system when the engine is hot, causing dam- much water in the brake fluid, the brake sys- ation essarily comply with the VW 501 14 stand- age. tem could be damaged. In addition, the boil- ard. Always check the information on the ● If a lot of liquid coolant has been lost, wait Oper ing point of the brake fluid is significantly brake fluid container and ensure that you are for the engine to cool down completely before lowered. When the brake fluid contains too using suitable brake fluid. adding coolant. Extensive coolant loss is an much water and the brakes are subject to indication of leaks in the engine cooling sys- A suitable brake fluid can be obtained from considerable forces, bubbles of water vapour tem. Have the engine cooling system inspec- technical service centres. can form in the system. These bubbles can ted immediately by a specialised workshop. significantly reduce braking power, notably Otherwise engine damage may occur. Brake fluid level increasing braking distance, and could even ety ● When refilling or changing service liquids, result in the total failure of the brake system. The level of the brake fluid should always be ensure that you put the liquids into the right Saf Ensuring that the brake system is always between the MIN and MAX marks, or above tank. Making a mistake when refilling could functioning correctly is essential for your own the MIN mark ››› . » cause serious malfunctions and damage the safety and the safety of other road users engine! ››› . 225

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders