owners manual Skoda Octavia

all ratings: 0 average rating: 5

3ARNING Sealing and inflating the tyre ■ During inflation, the tyre inflation hose and air compressor may get hot – First read and observe the introductory information and safety warn- risk of injury! ings on page ėĖĞ.  ■ Do not place the hot tyre inflation hose or hot air compressor on flammable materials – risk of fire! Sealing ■ If you cannot inflate the tyre to at least ė.ĕ bar, this means the damage sus- Forcefully shake the tyre inflator bottle Ėĕ » Fig. ĖĞę on page ėėĕ several times. › tained was too serious. 0he sealing agent cannot be used to seal the tyre.  Firmly screw the inflation hose Ę onto the tyre inflator bottle Ėĕ clockwise. › Do not drive the vehicle! Seek help from a ŠKODA specialist garage! 0he film on the cap is pierced automatically. ›Remove the plug from the inflation hose Ę and plug the open end fully onto the tyre valve. CA10ION Hold the bottle Ėĕ with the bottom facing upwards and fill all of the sealing › agent from the tyre inflator bottle into the tyre. Switch off the air compressor after running ĝ minutes at the latest – risk of over- ›Remove the empty tyre inflator bottle from the valve. heating! Allow the air compressor to cool a few minutes before switching it on Screw the valve core back into the tyre valve using the valve remover Ė .  › again. Inflating ›Screw the tyre inflation hose Ě » Fig. ĖĞę on page ėėĕ of the air compressor Checking after Ėĕ minutes firmly onto the tyre valve. ›Check that the air release valve Ĝ is closed. First read and observe the introductory information and safety warn- ›Start the engine and run it in idle. ings on page ėĖĞ.  ›Plug the connector Ğ into Ėė 2olt socket » page Ĝę. ›Switch on the air compressor with the ON and OFF switch ĝ . Check the tyre inflation pressure after driving for Ėĕ minutes! ›Allow the air compressor to run until a pressure of ė.ĕ - ė.Ě bar is achieved. Max- If the tyre inflation pressure is Ė.Ę bar or less imum run time of ĝ minutes » ! › Do not drive the vehicle! 5ou cannot properly seal with tyre with the break- ›Switch off the air compressor. down kit. ›If you cannot reach an air pressure of ė.ĕ – ė.Ě bar, unscrew the tyre inflation ›Seek help from a ŠKODA specialist garage. hose Ě from the tyre valve. ›Drive the vehicle Ėĕ metres forwards or backwards to allow the sealing agent to If the tyre inflation pressure is Ė.Ę bar or more “distribute” in the tyre. ›Adjust the tyre inflation pressure to the correct value (see inside of fuel filler ›Firmly screw the tyre inflation hose Ě back onto the tyre valve and repeat the cap). inflation process. ›Continue driving carefully to the nearest ŠKODA specialist garage at a maximum ›If you cannot reach the required tyre inflation pressure here either, this means  speed of ĝĕ km/h. the tyre has sustained too much damage. 5ou cannot seal with tyre with the breakdown kit » . ›Switch off the air compressor. ›Remove the tyre inflation hose Ě from the tyre valve. Once a tyre inflation pressure of ė.ĕ – ė.Ě bar is achieved, continue the journey at a maximum speed of ĝĕ km/h. Check the tyre inflation pressure after driving for Ėĕ minutes » page ėėĖ. Emergency equipment, and self-helpėėĖ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders