owners manual Skoda Octavia

all ratings: 0 average rating: 5

Let all of the occupants get out. 3hile changing a tyre, the occupants of the › Subsequent steps vehicle should not stand on the road (instead they should remain behind a crash barrier). First read and observe the introductory information and safety warn- ›Switch off the engine. ings on page ėĖě.  ›Move the gearshift lever into Neutral or move the selector lever for the auto- matic gearbox into position P. 0he following steps must also be performed after changing the wheel. ›Firmly apply the handbrake. ›Stow and attach the replaced wheel in the spare wheel well using a special ›If a trailer is connected, remove it. screw » page ėĖĖ. ›Remove the vehicle tool kit » page ėĖĚ and the spare wheel » page ėĖĖ from the  ›Stow the vehicle tool kit in the space provided. luggage compartment. ›Check the tyre pressure on the installed spare wheel as soon as possible. ›Have the tightening torque of the wheel bolts checked with a torque wrench as soon as possible. Changing a wheel ›Change the damaged wheel or consult a ŠKODA specialist garage about repair possibilities. First read and observe the introductory information and safety warn- ings on page ėĖě.  3ARNING ›Remove the full wheel trim » page ėĖė or caps » page ėĖė. ■ If it is determined that the wheel bolts are corroded and difficult to turn ›First of all slacken the anti-theft wheel bolt and then the other wheel when changing the wheel, the bolts must be replaced before checking the bolts » page ėĖĝ. tightening torque. ›Jack up the vehicle until the wheel that needs changing is clear of the ■ Drive cautiously and only at a moderate speed until the tightening torque ground » page ėĖĝ. has been checked.  ›1nscrew the wheel bolts and place them on a clean surface (cloth, paper, etc.). ›Remove the wheel. ›Attach the spare wheel and slightly screw on the wheel bolts. ›Lower the vehicle. ›Alternately tighten the wheel bolts opposite each other using the wheel wrench (crosswise) and then tighten the anti-theft wheel bolt » page ėĖĝ. ›Replace the wheel trim or the caps. 3ARNING ■ All bolts must be clean and must turn easily. ■ 1nder no circumstances grease or oil the wheel bolts! ■ 3hen fitting unidirectional tyres, ensure that the direction of rotation is cor- rect » page ėĕĜ.  Emergency equipment, and self-helpėĖĜ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders