owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube owners manual EN

Document: pdf (3 MB) 329 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (221,1) ON position. The vehicle should return to 2. Apply the parking brake. its normal operating condition. If it does 3. Remove the shift lock release coverA not return to its normal operating condi- * tion, have a NISSAN dealer check the using a suitable tool. transmission and repair if necessary. 4. Push down the shift lock release using a suitable tool. WARNING 5. Push the selector lever button and move the When the high fluid temperature pro- selector lever to the N (Neutral) position tection mode or fail-safe operation while holding down the shift lock release. occurs, vehicle speed may be gradually Place the ignition switch in the ON position to reduced. The reduced speed may be unlock the steering wheel (if so equipped). The lower than other traffic, which could vehicle may be moved to the desired location. increase the chance of a collision. Be SSD0864 Replace the removed shift lock release cover especially careful when driving. If ne- after the operation. cessary, pull to the side of the road at aShift lock release For models with Intelligent Key system: If the safe place and allow the transmission If the battery charge is low or discharged, thebattery is discharged completely, the steering to return to normal operation, or have itselector lever may not be moved from the Pwheel cannot be unlocked. Do not move the repaired if necessary. (Park) position even with the brake pedal vehicle with the steering wheel locked. depressed and the selector lever button pushed. Tomovetheselector lever, perform the followingIf the selector lever cannot be moved out of the procedure: P (Park) position, have a NISSAN dealer check the CVT system as soon as possible. 1. Models with Intelligent Key system: Place the ignition switch in the OFF or WARNING LOCKposition. If the selector lever cannot be moved Models without Intelligent Key system:from the P (Park) position while the Place the ignition switch in the LOCKengine is running and the brake pedal position, and remove the key if it is inserted.is depressed, the stop lights may not Starting and driving5-17 Model "Z12-D" EDITED: 2009/ 9/ 17

Download PDF

Click here to download a pdf file with an instruction manual for Nissan Cube
year of production from: 2008

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.