Mitsubishi Galant IX 9 owners manual page 215

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Galant, year of production 2003 - 2012:

BK0121200US.book 126 ページ㧞㧜㧝㧜年４月㧝４日　水曜日　午前㧝㧝時㧞４分 Features and controls 6. If the indicator light on HomeLink® blinks rapidly for 2 Programming HomeLink® for Canadian cus- seconds and then turns solid, HomeLink® has picked up atomers “rolling code” garage door opener signal. Now continue Prior to 1992, D.O.C regulations required hand-held transmit- with the next steps to train HomeLink® to complete theters to stop transmitting after 2 seconds. To program your programming. hand-held transmitter to HomeLink®, continue to press and 7. Press and release the “smart” or “learn” program button hold HomeLink® button (note steps 2 through 4 under “Pro- located on the garage door opener’s motor to activate thegramming HomeLink®”) while you press and re-press “training mode”. This button is usually located near the(“cycle”) your hand-held transmitter every 2 seconds until the antenna wire that hangs down from the motor. If the wireindicator light flashes rapidly (indicating successful program- originates from under a light lens, you will need to remove the lens to access the program button. ming). NOTE Operating HomeLink® 3 ●Once you have pressed and released the program button To operate, simply press the appropriate programmed on the garage door opener’s motor and the “training light”HomeLink® button. The red indicator light will illuminate while the signal is being transmitted. is on, you have 30 seconds in which to perform step 8. Programming trouble diagnosis Use the help of a second person for convenience to assist when performing this step. If HomeLink® does not quickly learn the hand-held transmitter 8. Quickly within 30 seconds of pressing and releasing theinformation: ●Replace the hand-held transmitter batteries with new bat- garage door opener program button, firmly press andteries. release HomeLink® button you’ve just programmed. Press and release HomeLink® button up to three times to●Position the hand-held transmitter with its battery area complete the training. facing away from HomeLink® surface. 9. To program the remaining HomeLink® buttons for addi-●Press and hold both HomeLink® and hand-held transmit- tional door or gate openers, follow steps 2-8 only.ter buttons without interruption. NOTE ●Position the hand-held transmitter 2 to 5 inches (50 to 126 ●Do not repeat step 1 unless you want to “clear” all previ-mm) away from HomeLink® surface. Hold the transmit- ously programmed HomeLink® buttons. ter in that position for up to 15 seconds. If HomeLink® is If you have any questions or are having difficulty programmingnot programmed within that time, try holding the trans- your HomeLink® buttons, please refer to the HomeLink® webmitter in another position with the indicator light in view site at: www.homelink.com or call 1-800-355-3515. at all times. 3-126

owners manual Mitsubishi Galant

owners manual Mitsubishi Galant - year of production: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 - Mitsubishi Galant IX 9 owners manual EN