BMW M5 E60 M Power owners manual page 215

text version of content this owner's manual page from owners manual to the vehicle BMW M5 E60, year of production 2005 - 2010:

ce Fast measurement 5.Change to upper field if necessary. Turn the In addition to the automatic measurement, you controller until "Service requirements" is can also determine the current oil level manu-selected and press the controller. ally, e.g. after adding engi ne oil, but with a lower At a glan degree of measuring accuracy. 1.With the engine at operating temperature, i.e. after at least 6 miles/10 km of uninter- ls rupted driving, park the vehicle in a horizon- o tal position. r t n 2.Allow the engine to run at idle. Co 3.Press the BC button on the turn signal lever repeatedly until the oil level display is shown in the instrument cluster.6.Change to the second field from the top if ps 4.Press the BC button for at least 2 seconds.necessary. Turn the controller until "Engine g ti The oil level is determined. A clock symbol oil level" is selected and press the control-n is displayed during the measurement.ler. The oil level is displayed.ivi 5.After approx. 1 minute th e current oil level is Dr displayed. Possible messages > "Engine oil level O.K." Displaying via iDrive > "No measurement available: Updating iDrive, for operating principle refer to page16.engine oil level measurement.": 1.Press the button. The engine oil level is measured. This pro- This opens the start menu.cess can take approx. 1minute when Navigation stopped on a level surface with the engine t 2.Press the controller to open the menu.running and approx. 5minutes while driv-n 3.Turn the controller until "Info sources" is ing. nme selected and press the controller.If the engine oil has been topped off, the ai measurement of the oil level can take up to t r 30minutes. > "Oil level at the minimum! Refill with 1 quart Ente of engine oil.": ns Add a maximum of 1USquart/1liter of io engine oil at the next opportunity, refer also icat to Adding engine oil below. Add at least un 0.5USquart/0.5liters of oil; otherwise, the mm oil level check cannot reliably display the Co new oil level. 4.Turn the controller until "Service Info" is If the oil level displayed is below minimum, selected and press the controller.add engine oil immediately. Failure to do so may lead to engine damage. *: > "Engine oil level too high"lity Have the vehicle checked immedi-bi o ately, otherwise engine damage may M result if too much oil has been added.< > "Please observe recalculated service inter-nce val for engine oil": 213 Refere Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG

owners manual BMW M5 E60

owners manual BMW M5 E60 - year of production: 2005, 2006, 2007, 2008, 2009, 2010 - BMW M5 E60 M Power owners manual EN