Nissan Cube owners manual page 212

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (216,1) BEFORESTARTING THE ENGINE STARTING THE ENGINE . Make sure the area around the vehicle isMODELSWITHOUTINTELLIGENTKEYstarts. clear. SYSTEM . Ifthe engine is very hard to start . Check fluid levels such as engine oil, cool-1.Apply the parking brake.because it is flooded, depress the ant, brake fluid, and window washer fluid as accelerator pedal all the way to the floor frequently as possible, or at least whenever2.Continuously Variable Transmissionand hold it. Crank the engine for 5 - 6 you refuel. (CVT) models: seconds. After cranking the engine, . Check that all windows and lights are clean.Move the selector lever to the P (Park) or Nrelease the accelerator pedal. Crank (Neutral) position. (P is recommended.)the engine with your foot off the . Visually inspect tires for their appearance accelerator pedal by turning the igni- and condition. Also check tires for properThe starter is designed so that it does nottion switch to START. Release the inflation. operate unless the selector lever is in eitherignition switch when the engine starts. of the above positions. Ifthe engine starts, but fails to run, . Lock all doors. repeat the above procedure. Manual Transmission (MT) models: . Position seat and adjust head restraints. Move the shift lever to the N (Neutral) CAUTION . Adjust inside and outside mirrors.position. Depress the clutch pedal fully to . Fasten seat belts and ask all passengers tothe floor. Do not operate the starter for more do likewise. Thestarter is designed not to operate unlessthan 15 seconds at a time. If the engine . Check the operation of warning lights whenthe clutch pedal is fully depressed.does not start, turn the ignition switch the ignition switch is placed in the ON off andwait10secondsbeforecranking 3. Crank the engine with your foot off theagain, otherwise the starter could be position. (See “WRNAING/INDICATORaccelerator pedal by turning the ignitiondamaged. LIGHTS AND AUDIBLE REMINDERS” inswitch to START. Release the switch when the “2. Instruments and controls” section.)the engine starts. If the engine starts, but4.Warm-up fails to run, repeat the above procedure. . Ifthe engine is very hard to start inAllow the engine to idle for at least 30 extremely cold weather or when restart-seconds after starting. Do not race the engine while warming it up. Drive at ing, depress the accelerator pedal a littlemoderate speed for a short distance first, (approximately 1/3 to the floor) and holdespecially in cold weather. In cold weather, it and then crank the engine. Release thekeeptheenginerunningforaminimumof2- accelerator pedal when the engine 5-12 Starting and driving Model "Z12-D" EDITED: 2009/ 9/ 17

owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube owners manual EN