owners manual BMW M3 E92

owners manual BMW M3 E92 - year of production: 2007, 2008, 2009, 2010, 2011, 2012 - M Power M3 owners manual EN

Document: pdf (9.19 MB) 250 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle BMW M3 E92, year of production 2007 - 2012:

Do not use oil additives as these may able for your BMW. Ask your BMW center for od cause engine damage.< suitable additives. Your BMW center will be glad to answer Only use suitable additives, otherwise ho any questions regarding BMW High Per-engine damage may result. Because e formance Synthetic Oil or approved synthetic additives are harmful to your health, it is impor- h oils.< tant to follow the instructions on the contain- You can also call BMW of North America at ers.< 1-800-831-1117 or visit the website Comply with the appropriate environ- www.bmwusa.com to obtain this information.mental protection regulations when dis- posing of coolant additives.< Viscosity ratings Checking coolant level Under tViscosity is a measure of an oil's flow rating and is categorized in SAE classes.1. Do not open the engine hood before the Approved oils belong to the 10W-60 SAE engine has cooled down. class.< 2. Turn the cap of the expansion tank a little counterclockwise to allow any accumulated Alternative oil types pressure to escape, then continue turning If BMW High Performance Synthetic Oil is not to open. available, you can add small quantities of other 3. The coolant level is correct if it is between synthetic oils in between oil changes. Only use the maximum and minimum marks in the oils with the following specifications:filler neck, refer also to the diagram next to > Viscosity: the filler neck. preferred: SAE10W-60; alternative: SAE 10W-40, SAE5W-50 or SAE10W-50 > Specification: API SJ/CF, API SK/CF or higher Low ambient temperatures The oils used at BMW factories for your vehicle type are suitable for virtually any ambient tem- perature. However, if the vehicle is operated at 4. If the coolant is low, slowly add coolant up to temperatures below –47/–206 for extended the specified level; do not overfill. periods, your BMW center will be glad to rec-5. Turn the cap until there is an audible click. ommend an optimal oil. 6. If the loss of coolant is substantial, have the cause eliminated as soon as possible. Coolant Do not add coolant to the cooling system when the engine is hot. Escaping coolant can cause burns.< Coolant consists of half water and half additive. Not all commercially available additives are suit- 206

Download PDF

Click here to download a pdf file with an instruction manual for BMW M3 E92
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.