owners manual BMW M3 E92

owners manual BMW M3 E92 - year of production: 2007, 2008, 2009, 2010, 2011, 2012 - M Power M3 owners manual EN

Document: pdf (9.19 MB) 250 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle BMW M3 E92, year of production 2007 - 2012:

Press button 4 in the turn indicator lever repeat-Have the vehicle checked immedi- od edly until the oil level display appears in the ately, otherwise the excess oil may instrument cluster. lead to engine damage.< ho The oil level must be between the two mark-5 A value cannot be read at this time. The e ings. engine is not yet warm. h A new measurement is taken automatically Quick measurement each time the engine is started. In addition to the automatic measurement, you Possible displays can also determine the current oil level manu- ally, e.g. after adding engine oil, but such mea- surements are less accurate. Under t 1. Park the vehicle with a warm engine, i.e. after an uninterrupted drive of at least 6miles/10km, on a horizontal surface. 2. Let the engine idle. 3. Press the computer button in the turn indi- cator lever repeatedly until the oil level dis- play appears in the instrument cluster. 4. Press the computer button for at least 2seconds. The oil level is determined. A clock symbol appears during measurement. 5. After approx. 1minute, the current oil level is displayed. Display via iDrive iDrive, for operating principle refer to page16. 1 Oil level OK 1. Press the button. 2 Oil level is being checked.This opens the start menu. This can take about 1 minute if the car is at 2. Press the controller to open the menu. a standstill on a level surface, or about 3. Select "Info sources" and press the control- 5minutes while the car is moving.ler. If engine oil was added, it can take up to 30minutes to get an oil level reading. 3 Oil level down to minimum: Add engine oil at the next opportunity, but no more than 1 USquart/1 liter, refer also to Adding engine oil on page205. Add at least 0.5USquart/0.5liters, otherwise the oil- level monitor will be unable to display the new value reliably. If the oil level is below the minimum value, add engine oil immediately to avoid engine 4. Select "Service Info" and press the control- damage. ler. 4 Oil level is too high. 204

Download PDF

Click here to download a pdf file with an instruction manual for BMW M3 E92
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.