Nissan Murano Z51 owners manual page 204

text version of content this owner's manual page from owners manual to the vehicle Nissan Murano, year of production 2008:

Black plate (204,1) telescopic steering” earlier in this section then push the button on the Intelligent Key. . Push the ignition switch to the ON and “Outside mirrors” earlier in this section.The driver’s seat, steering wheel and outside position and push the memory switch (1 4. Push the SETswitch and, within 5 seconds, mirrors will move to the memorized position. or 2). push the memory switch (1 or 2). . Within 45 seconds of opening the Confirming memory storage driver’s door, push the memory switch The indicator light for the pushed memory GUID-C42E9A63-7C42-464C-ABAE-3B9C731E9AA0 switch will stay on for approximately 5 . Push the ignition switch to the ON position (1 or 2). and push the SET switch. If the main The driver’s seat, steering column and seconds after pushing the switch. memory has not been stored, the indicator outside mirrors will move to the memorized Ifmemory is stored in the same memory light will come on for approximately 0.5 position with the indicator light flashing, and switch, the previous memory will be deleted. second. When the memory has stored in then the light will stay on for approximately 5 Linking Intelligent Key to a stored mem- position, the indicator light will stay on for seconds. ory position approximately 5 seconds. SYSTEM OPERATION GUID-83DABFB4-1BAC-4D52-AAD9-89B23BBFA840.If the battery cable is disconnected, or if the GUID-6E092FC2-4164-461D-8930-0184862E613A The Intelligent Key can be linked to a stored fuse opens, the memory will be canceled. In The automatic drive positioner system will not memory position with the following procedure. this case, reset the desired position using work or will stop operating under the following 1. Follow one of the steps for storing a memory the previous procedure. conditions: position. . If optional keys are added to your vehicle, . Whenthevehicle speed is above 4 MPH (7 . While the indicator light for the memory the memory storage procedure to switch 1 km/h) (entry/exit function). switch being set is illuminated for 5 sec- or 2 and linking Intelligent Key procedure to . When the vehicle is driven (memory sto- onds, push the button on the Intelligent a stored memory position should be per- rage). Key. formed again for each Intelligent Key. For . When the adjusting switch for the driver’s . Pushtheignition switch to the OFF position, additional Intelligent Key information, see seat and steering column is turned on while andthenpushtheSETswitch.Pushthe “Keys” earlier in this section. the automatic drive positioner is operating. button while pushing the memory button Selecting the memorized position . Whentheseat,steering column and outside while the indicator light stays on for approxi- GUID-1B13DD82-31E7-4920-83B1-6D7C94FBAB3Emirrors have already been moved to the mately 5 seconds. 1. Move the selector lever to the P (Park) memorized position. If the indicator light blinks, the Intelligent Key is position. . When no position is stored in the memory linked to that memory setting. 2. Use one of the following methods to move switch. Pushtheignitionswitch to the OFF position, and the driver’s seat, the outside mirrors and the steering wheel. 3-50 Pre-driving checks and adjustments [ Edit: 2011/ 7/ 18Model: Z51-D ]

owners manual Nissan Murano

owners manual Nissan Murano - year of production: 2008 - Nissan Murano Z51 owners manual EN