Nissan Murano Z51 owners manual page 203

text version of content this owner's manual page from owners manual to the vehicle Nissan Murano, year of production 2008:

Black plate (203,1) AUTOMATIC DRIVE POSITIONER (if so equipped) GUID-851FDA9C-62A3-4F94-9BB3-456D0780664E The automatic drive positioner system has two switch for more than 10 seconds. features: The indicator lights on the memory switches (1 . Entry/exit function (if equipped) and 2) will blink once when the function is . Memory storage canceled, and the indicator lights will blink twice ENTRY/EXIT FUNCTION (if equipped) when the function is activated. Note that the GUID-B20D2394-0488-4194-B222-ACBB971CCC5Cindicator lights may illuminate after 5 seconds This system is designed so that the driver’s seat while holding the SET switch. This indicates and steering column will automatically move readiness for linking the Intelligent Key to a when the selector lever is in the P (Park) stored memory position. Keep the SET switch position. This allows the driver to get into and pressed for more than 10 seconds to turn on or out of the driver’s seat more easily. off the entry/exit function. The driver’s seat will slide backward and the The entry/exit function can also be activated or steering wheel will move up when the driver’s canceled if the “Lift Steering Wheel on Exit” key door is opened with the ignition switch in the or “Slide Driver Seat Back on Exit” key is turned SPA2756 LOCK position and the Intelligent Key not to ON or OFF in the “Comfort” settings. (See MEMORYSTORAGE inserted in the Intelligent Key port. “Vehicle information and settings” in the “4. GUID-1645D943-6DDE-4A8E-B347-C359AF16FEDF The driver’s seat and steering wheel will return Monitor, heater, air conditioner, audio, phone Two positions for the driver’s seat, steering to the previous positions when the ignition and voice recognition systems” section.) column and outside mirrors can be stored in the switch is pushed to the ACC position. automatic drive positioner memory. Follow these Initialize entry/exit function procedures to use the memory system. The driver’s seat will not return to the previous GUID-3B7D11F0-51D7-4A5F-B078-9C3A3C24A7461.Move the selector lever to the P (Park) positions if the seat or steering adjusting switchIf the battery cable is disconnected, or if the fuse is operated when the seat is at the exit position.opens, the entry/exit function will not work position. Cancel or activate entry/exit function though this function was set on before. In such 2. Push the ignition switch to the ON position. GUID-58D4463D-3833-4D6F-AB39-9C380DA99AC9a case, after connecting the battery or replacing3.Adjust the driver’s seat, steering column and The selector lever must be in the P (Park) with a new fuse, open and close the driver’s outside mirrors to the desired positions by position with the ignition switch in the OFF door more than two times after the ignition manually operating each adjusting switch. position. switch is placed in the LOCK position from the For additional information, see “Seats” in the The entry/exit function can be activated or ON position. The entry/exit function will be “1. Safety — Seats, seat belts and supple- canceled by pressing and holding the SET activated. mental restraint system” section and “Tilt/ Pre-driving checks and adjustments 3-49 [ Edit: 2011/ 7/ 18Model: Z51-D ]

owners manual Nissan Murano

owners manual Nissan Murano - year of production: 2008 - Nissan Murano Z51 owners manual EN