owners manual Seat Leon

all ratings: 0 average rating: 5

200 Driver assistance systems Overtaking Other vehicles changing lanes When the turn signal comes on before overtaking, the ACC accelerates theVehicles changing lanes not far away from the vehicle can only be detected vehicle automatically and thus reduces the distance between it and the ve-when they fall within the range of the sensors. Consequently, the ACC will hicle ahead. take longer to react ⇒ Fig. 137 C. In these cases, brake yourself if necessary. When you move into the overtaking lane, if the ACC does not detect any ve-Stationary vehicles hicle in front it accelerates until it reaches the stored speed and keeps it During driving, the ACC does not detect stationary objects, such as the end constant. of a jam or damaged vehicles. The acceleration can be interrupted at any time by stepping on the brake If a vehicle detected by ACC turns or moves over and there is another sta- pedal or pulling back on the lever ⇒ page 193. tionary vehicle in front of it, the ACC will not react ⇒ Fig. 137 D. In these ca- ses, brake yourself if necessary. Driving through a bend On entering or coming out of a bend, the radar sensor may no longer detectVehicles travelling in the opposite direction and vehicles changing lanes the vehicle ahead of it or may react before a vehicle in the adjacent lane The ACC does not react to vehicles approaching in the opposite direction or ⇒ Fig. 136 A. In such situations the vehicle may brake unnecessarily or may vehicles changing lanes. cease to react with regard to the vehicle ahead. In this case, the driver has to act by accelerating or interrupting the braking process by stepping on the Metal objects brake pedal or pulling the third lever backwards ⇒ page 193. Metal objects, e.g. rails on the road or the panels used on work sites, may confuse the radar sensor and cause wrong reactions in the ACC. Driving in tunnels When going through tunnels, the radar sensor function may be limited. Factors that may affect the operation of the radar sensor Switch off the ACC in tunnels. If the operation of the radar sensor were affected by heavy rain, water mist, snow or mud, the ACC is switched off temporarily. The relevant message ap- Narrow vehicles or vehicles not driving straight pears on the instrument panel display. If necessary, clean the radar sensor. The radar sensor can only detect narrow vehicles or those that are not driv- ing straight within its range ⇒ Fig. 136 B. This is particularly applicable to When the radar sensor works properly again, the ACC will be automatically narrow vehicles such as motorbikes. In these cases, brake yourself as nec- available again. The message on the instrument panel display will go off essary. and the ACC can be switched on again. Vehicles with loads and special accessories In the event of a heavy reverse reflection of the radar signal, for example, in a closed parking, ACC operation may be affected. The load and special accessories of other vehicles that jut out over the side, backwards or forward may be outside the range of the ACC. Trailer towing Switch off the ACC when driving behind vehicles with loads or special acces- When driving with a trailer, the ACC controls less dynamically. sories, as well as when overtaking these vehicles. In these cases, brake yourself as necessary.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders