owners manual Ford Mustang

all ratings: 0 average rating: 5

Roadside Emergencies Jump Starting 1. Start the engine of the booster vehicle and rev the engine moderately, or press the accelerator gently to keep your engine speed between 2000 and 3000 1 rpms, as shown in your tachometer. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both vehicle engines for an additional three minutes before 3 disconnecting the jumper cables. 4 Removing the Jumper Cables 2 Remove the jumper cables in the reverse order that they were connected. 4 E142664 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery. 2. Connect the other end of the positive 1 (+) cable to the positive (+) terminal 2 of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery. 4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle's engine, or 3 connect the negative (-) cable to a ground connection point if available. WARNING E142665 Do not connect the end of the 1. Remove the jumper cable from the second cable to the negative (-) ground metal surface or connecting terminal of the battery to be jumped. point, if available. A spark may cause an explosion of the gases that surround the battery. 194 Mustang (), enUSA, First Printing

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders