owners manual Mitsubishi Eclipse

owners manual Mitsubishi Eclipse - year of production: 1995, 1996, 1997, 1998, 1999 - Mitsubishi Eclipse II technical information manual EN

Document: pdf (13.48 MB) 381 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Eclipse, year of production 1995 - 1999:

2-80 POWER TRAIN- Automatic Transaxle Engine Speed The TCM uses both direct engine speed input from the crank- ‘Lj shaft position sensor or distributor and calculated engine speed input from the PCM over the CCD bus. The direct input is required to provide immediate information for use by the TCM control logic. The slower CCD engine speed data is used by the TCM fail-safe logic to confirm that the direct engine speed data is valid. Speed Control Switch The speed control on/off switch modifies the shift pattern when a speed control “on” signal is received by allowing a torque converter clutch engagement or disengagement, as well as kickdown shifts. Manifold Absolute Pressure Sensor (MAP) The MAP sensor provides engine load input and output torque load on the input shaft to the TCM. These signals are sent across the CCD bus to the TCM. The TCM uses this information d to modify shifting and reduce 3-4 shift hunting on grades.

Download PDF

Click here to download a pdf file with an instruction manual for Mitsubishi Eclipse
year of production from: 1995

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.