owners manual Hyundai Santa Fe

all ratings: 0 average rating: 5

WHAT TO DO IN AN EMERGENCY 3 11 Wheel nut tightening torque: it is correct. Always reinstall the valve Steel wheel & aluminium alloy wheel: cap after checking or adjusting tire 65-80 lb.ft (900-1,100 kg.cm) pressure. If the cap is not replaced, air may leak from the tire. If you lose a valve cap, buy another and install it as D060J02O-AAT soon as possible. After Changing Wheels After you have changed wheels, al- ways secure the flat tire in its place and return the jack and tools to their proper storage locations. HSM4019 Then position the wrench as shown in the drawing and tighten the wheel nuts. Be sure the socket is seated com- pletely over the nut. Do not stand on the wrench handle or use an extension pipe over the wrench handle. HSM5014 Go around the wheel tightening every other nut until they are all tight. Then If you have a tire gauge, remove the valve cap and check the air pressure. If double-check each nut for tightness. After changing wheels, have a techni- the pressure is lower than recom- mended, drive slowly to the nearest cian tighten the wheel nuts to their proper torque as soon as possible. service station and inflate to the correct pressure. If it is too high, adjust it until smhma-3.p65 11 7/28/04, 5:13 PM

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders