owners manual Seat Arona

all ratings: 0 average rating: 5

Operation The tiptronic gives the driver the option tomanent manual gear change using the– Wait for the gearbox to engage the gear (a h ge gears manually. gearshift paddles, move the selector leverslight movement can be felt). c an from position D/S to the right. – Release the brake and press the accelerator Changing gear manually with the selector ››› . When accelerating, the gearbox automatical- lever ly shifts up into the next gear shortly before It is possible to change to tiptronic mode, Stopping briefly the maximum engine speed is reached. both when the vehicle is stopped and while – Apply the foot brake to hold the vehicle If you select a lower gear, the automatic gear- driving. briefly when stationary (for instance at traf- box will not shift down until there is no risk of – To switch to tiptronic mode, move the se- fic lights). Do not press the accelerator. over-revving the engine. lector lever from position D/S to the right. When the kick-down feature is used, the As soon as the change is made the selector Stopping/Parking gearbox shifts down to a lower gear, depend- level will be shown in the position M on the If the driver door is opened and the selector ing on road speed and engine speed. instrument panel display (for example M4 lever is not in position P, the vehicle could means that the fourth gear is engaged). move. The driver message will be:  Gear – Move the selector lever forwards + to se- change: selector lever in the Driving tips ect drive position!. Additionally, a buzzer l a higher gear ››› Fig. 179. will sound. – Move the selector lever backwards – toThe gearbox changes gear ratios automatical- ect wer gear. ly as the vehicle moves. – Press and hold the brake pedal ››› . sel a lo The engine can only start with the selector– Apply the handbrake. Changing gear manually with the gearshift lever in position P or N. At low temperatures, – Move the selector lever to position P. paddles* below -10°C (50°F), the engine can only start The gearshift paddles can be used when thewith the selector lever in position P. l Hoding the car on a hill selector lever is in the position D/S or M. – Always apply the brake pedal firmly to pre- Starting the vehicle – Press the gearshift paddle + to select a vent the vehicle from “moving backwards; higher gear ››› Fig. 180. – Press and hold the brake pedal. if necessary, apply the handbrake” ››› . – Press the gearshift paddle – to select a– Press and hold the interlock button (theDo not try to stop the vehicle “rolling back” w button on the selector lever handle), moveby increasing the engine speed when a lo er gear. the selector lever to the desired position,gear is engaged (pressing the accelerator) – With the selector lever in position D/S, if no for instance D ››› page 183, and release the››› . paddle is operated during a short period of interlock button. time, the gearbox control system switches back to automatic mode. To switch to per- 186

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders