Mitsubishi Lancer VIII 8 owners manual page 186

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer, year of production 2007 - 2016:

Multi-information display 8- Average fuel consumption display, Service reminder NOTE momentary fuel consumption display The driving range is determined based on the (Type 2) fuel consumption data. This may vary 9- Average speed display, momentary fuelShows the distance and number of months consumption display (Type 2)until the next periodic inspection.depending on the driving conditions and hab- 10- Function setting screen Refer to “Service reminder” on page 5-123.its. Treat the distance displayed as just a rough guideline. 11- Redisplay of a warning display screenEngine coolant temperature dis-When you refuel, the driving range display is automatically updated. 5 NOTE play However, if you only add a small amount of While driving, the function setting screen is fuel, the correct value will not be displayed. not displayed even if you operate the multi- Fill to a full tank whenever possible. Shows the engine coolant temperature.When your vehicle is stopped on an information meter switch. Always park the If the coolant becomes hot, “” will blink. extremely steep hill, the driving range value vehicle in a safe place before operating. may change. This is due to the movement of Pay careful attention to the engine coolant Refer to “Changing the function settings temperature display while you are driving.fuel in the tank and does not indicate any (With ignition switch in the “ON” position)” problem. on page 5-126. When there is information to be announced, The display setting can be changed to the CAUTION preferred units (miles or km). such as a system fault, the tone sounds and Refer to “Changing the function settings the screen display is changed.If the engine is overheating, “” will blink. (With ignition switch in the “ON” position)” In this case, the bar graph is on the red zone. Refer to “Interrupt display screen (With igni- on page 5-126. Immediately park the vehicle in a safe place tion switch in the “ON” position)” on page 5-121. and take the required measures. Refer to “Engine overheating” on page 8-4. Odometer/Trip odometer Average speed display Driving range display The operation method is the same as whenThis displays the average speed from the last reset to the present. the ignition switch is in the “OFF” position.Shows the approximate driving range (how There are 2 types of mode settings as follows. many more miles or kilometers you can For further details, refer to “Odometer/Trip For details on how to change the average odometer” on page 5-114. drive) with the current fuel level. When this driving range falls below 30 miles (50 km), “-speed display setting, refer to “Changing the --” is displayed. function settings (With ignition switch in the Refuel as soon as possible. “ON” position)” on page 5-126. Features and controls5-119

owners manual Mitsubishi Lancer

owners manual Mitsubishi Lancer - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer VIII 8 owners manual EN