Audi R8 I 1 owners manual page 186

text version of content this owner's manual page from owners manual to the vehicle Audi R8, year of production 2006 - 2015:

document_0900452a816e6cc9.book Seite 184 Mittwoch, 21. Februar 2007 1:32 13 184 Self-help WARNING (continued) –Screw in themou nting pin (provided in the vehicle's tool kit) by hand in place of the wheel bolt ⇒ fig. 130. • The car can be damaged if the jack is not applied at the correct – Then unscrew the other wheel bolts as described above. jacking points. There is also a risk of injury since the jack can slip off suddenly if it is not properly engaged. – Take off the wheel ⇒. The mounting pin stays where it is. Caution Putting on the wheel A trolley jack or lifting platform must not be applied at the points shown ⇒page183, fig.128 -arrows-. – Put on the spare wheel, using the mounting pin to guide it into place ⇒. Taking off / putting on the wheel – Screw in the wheel bolts and tighten them lightly using Step-by-step instruct ions for taking off and putting on the the hexagonal opening in the screwdriver handle. wheel. – Then unscrew the mounting pin and tighten the remaining wheel bolt lightly. The wheel bolts should be clean and turn easily. Before putting on the wheel, inspect the condition of the wheel and hub mounting surfaces. These surfaces must be clean before mounting the wheel. The hexagonal opening in the screwdriver handle makes it easier to turn the wheel bolts when they are loose. The reversible screwdriver Fig. 130 Changing a blade should be removed when the tool is used for this purpose. wheel: Mounting pin in Note the direction of rotation when putting on a tyre with direc- wheel bolt hole nearest tional tread pattern ⇒ page 182. to the top Change the wheel as described below after loosening the Caution wheel bolts and raising the vehicle with the jack. When removing/fitting the wheel the rim may hit and damage the Taking off the wheel brake disc. For this reason, please take care and get a second person to assist you. –Using thehe xagonal opening in the screwdriver handle (provided in the vehicle's tool kit), unscrew the wheel bolt Note nearest to the top and place the bolt on a clean surface.Do not use the hexagonal socket in the screwdriver handle to loosen or tighten the wheel bolts.

owners manual Audi R8

owners manual Audi R8 - year of production: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 - Audi R8 I 1 owners manual EN