or
owners manual Audi R8
owners manual Audi R8 - year of production: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 - Audi R8 I 1 owners manual EN
Document:
pdf (8.51 MB) 210 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Audi R8, year of production 2006 - 2015:
document_0900452a816e6cc9.book Seite 181 Mittwoch, 21. Februar 2007 1:32 13
Self-help 181
– Unscrew the dust cap from the valve of the damaged – Move the switch 8 ⇒ page 180, fig. 126 on the
A
tyre. compressor to position I. After 5 minutes tyre pressure
– Screw the filler hose 10 onto the valve 7 ⇒ page 180, should be at least 1.8 bar.
A A
fig. 126. – Switch off the compressor by moving switch to
4 position0. If the necessary tyre pressure of at least 1.8
– Insert the connector A ⇒ page 180, fig. 125 into the bar is not reached this means that the tyre cannot be
cigarette lighter socket. repaired using the tyre sealant. You should obtain profes-
Inflating the tyre sional assistance.
8
–Move the switchA ⇒ page 180, fig. 126 on the Dismantling the Tyre Mobility System
4)
compressor to position I. After 5 minutes tyre pressure – Remove the filler hose from the valve and pull the
should be at least 1.8 bar. connector out of the socket.
– Switch off the compressor by moving switch to – Screw the dust cap onto the valve.
position0. If the necessary tyre pressure of at least 1.8
bar is not reached please follow the instructions given in – Put the empty tyre sealant can back into its original pack-
the section Re-inflating the tyre. aging and then secure it in the holder under the floor
panel in such a way that it will not leak.
Re-inflating the tyre – Then drive away immediately so that the tyre sealant can
– Remove the filler hose from the valve and pull the spread evenly in the tyre.
connector out of the socket.
– Slowly move the vehicle forwards and backwards about WARNING
10 metres. This enables the sealant to be distributed • Please observe the manufacturers' safety notes on the stickers
more evenly. on the compressor and the tyre sealant can.
– Remove the empty tyre sealant can and screw the • If it was not possible to build up a tyre pressure of 1.8 bar
5
compressor hose A ⇒page180, fig. 125 directly onto within 5 minutes this means that the tyre is too badly damaged.
the valve. Do not drive on.
– Insert the connector 4 into the cigarette lighter socket. • Seek professional assistance if the repair of a tyre puncture is
A not possible with the sealing compound.
4)The compressor should never be used for longer than 8 minutes.
Controls Safety Driving tips General maintenance Self-help Technical data
Download PDF
Click here to download a pdf file with an instruction manual for Audi R8
year of production from: 2006
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Audi R8 I 1 owners manual
pages 180 - 186
Audi R8 I 1 owners manual
page 183 / 210
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF
Others owner's manuals for this model: