owners manual Seat Alhambra

all ratings: 0 average rating: 5

alhambra_aleman.book Seite 182 Montag, 23. M‰rz 2009 1:12 13 182 Intelligent technology WARNING WARNING Special care must be taken when working on the engine or on components Try to always adapt the speed of the vehicle to weather, road and traffic in the engine compartment. conditions. Do not let the extra safety afforded by the system tempt you • It is important that you read and observe the corresponding warnings into taking any risks when driving. Risk of accident. before working in the engine compartment ⇒ page211.• The risk of accident is higher if you drive too fast, if you do not keep • If the brake warning symbol does not go out, or if it lights up when your distance from the car in front, and when the road surface is slippery or driving, the brake fluid level in the reservoir is too low or there is a fault in wet. The increased accident risk cannot be reduced by the brake assist the brake system. Risk of accident. Stop the vehicle and do not drive on. system. You should obtain professional assistance. • The brake assist system cannot defy the laws of motion. Slippery and • If the brake warning lamp  lights up together with the ABS warning wet roads are dangerous even with the brake assist system! lamp , the control function of the ABS could be out of action. This could • Modifications to the vehicle or work carried out incorrectly (e.g. to the cause the rear wheels to lock quickly when you brake. This could cause the engine, the brake system, running gear or any components affecting the rear to break away. Risk of skidding. Drive carefully to the nearest qualified wheels and tyres) could affect the efficiency of the ABS, EDL, ESP and TCS workshop and have the fault corrected. and lessen their efficiency. Brake assist system (BAS) Anti-locking brake system (ABS) The brake servo (BAS) works only when the engine is running.The anti-lock brake system prevents the wheels locking In an emergency, most drivers brake in time, but not with maximum force. during braking. This results in unnecessarily long braking distances.The anti-lock brake system (ABS) is an important part of the car's active safety In these cases the brake assist servo comes into action: on activating the system. brake pedal quickly, the assistant interprets this as an emergency. It then very How the ABS works quickly builds up the full brake pressure so that the ABS can be activated more quickly and efficiently, thus reducing the braking distance.If one of the wheels is turning too slowly in relation to the road speed, and is close to locking, the system will reduce the pressure for this wheel. The driver Do not reduce the pressure on the brake pedal. The brake assist system is made aware of this control process by a pulsating of the brake pedal and switches off automatically as soon as you release the brake.audible noise. This is a deliberate warning to the driver that one or more of the wheels is tending to lock and the ABS control function has intervened. In this situation it is important to keep the brake pedal fully depressed so the ABS can regulate the brake application. Do not “pump” the brake pedal.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders