owners manual Seat Arona

all ratings: 0 average rating: 5

Operation When the ASR is off, the warning lamp lightswarning lamp will also light up if a fault CAUTION up . The ASR should normally be left on.should occur in the ABS because the ASR op- ● To ensure that the ESC works correctly, all Only in exceptional circumstances, whenerates in conjunction with the ABS. For fur- four wheels must be fitted with the same wheel spin is required, it can be turned offther information, see ››› page 178. tyres. Any differences in the rolling radius of using the Easy Connect system menu, for ex- the tyres can cause the system to reduce en- ample: The  lamp provides information about the gine power when this is not desired. disconnection status of the system:* ● Any modifications made to the vehicle (for ●With compact temporary spare wheel. ●It stays lit when the ASR is disconnected example, to the engine, brake system, run- ●When using the snow chains. ning gear or to the combination of wheels via Easy Connect. ●When driving in deep snow or on soft ter- and tyres) may affect the operation of the By means of Easy Connect, the ASR function ABS, EDL, ESC and ASR. rain. is reactivated and the warning lamp switched ●When the vehicle is bogged-down, to free it off. “by rocking it.” Traction control system (ASR) WARNING The ASR should be switched on again as soon as possible. ● Remember that The traction control system prevents the driv- not even the ASR can defy the laws of physics. This should be kept in en wheels from spinning when the vehicle is Control lamp mind, particularly on slippery and wet roads accelerating. and when towing a trailer. There are three control lamps for the traction ● Always adapt your driving style to suit the Description and operation of the traction control system:  (for vehicles equipped condition of the roads and the traffic situa- control system during acceleration (ASR) with M-ABS),  (for vehicles equipped with tion. The greater safety provided by the ASR ESC) and . Both control lamps light up to- The ASR system intervenes by reducing en- should not encourage you to run any risks. gether when the ignition is switched on and gine power and preventing the driven wheels should turn off after approximately 2 sec- from slipping during acceleration. onds, which is the time taken for the functionCAUTION TCS helps the car to start moving, accelerate check. ● To ensure that the ASR works correctly, and climb a gradient in slippery conditions identical tyres should be fitted on all four where this may otherwise be difficult or even The  or  lamp has the following function:wheels. Any differences in the rolling radius impossible. of the tyres can cause the system to reduce ●It flashes when the ASR is working if the ve- engine power when this is not desired. The ASR automatically switches on when the hicle is moving. engine is started. If necessary, it could be ● Any modifications made to the vehicle (for switched on or off using the Easy ConnectIf the system is deactivated or if it has anyexample, to the engine, brake system, run- fault, the warning lamp will remain lit. Thening gear or to the combination of wheels system*. 178

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders