owners manual Mazda MX-5

all ratings: 0 average rating: 5

MX-5_8EN7-EA-14E_Edition1 Page179 Friday, March 28 2014 3:39 PM Black plate (179,1) Driving Your Mazda Starting and Driving Whenhavingtireschangedatan Replacing tires and wheels Authorized Mazda Dealer CAUTION WhenanAuthorizedMazdaDealer changes your vehicle's tires, they will ØWhenreplacing/repairing the tires complete the tire pressure sensor ID signal or wheels or both, have the work code registration. done by an Authorized Mazda Dealer, or the tire pressure sensors Whenchangingtiresyourself maybedamaged. If you or someone else changes tires, you ØThewheelsequippedonyour or someone else can also undertake the Mazdaarespecially designed for steps for the TPMS to complete the ID installation of the tire pressure signal code registration. sensors. Do not use non-genuine wheels, otherwise it may not be 1. After tires have been changed, switch possible to install the tire pressure the ignition ON, then back to ACC or sensors. OFF. 2. Wait for about 15 minutes. Besure to have the tire pressure sensors installed whenever tires or wheels are 3. After about 15 minutes, drive the replaced. vehicle at a speed of at least 25 km/h Whenhavingatire or wheel or both (16 mph) for 10 minutes and the tire replaced, the following types of tire pressure sensor ID signal code will be pressure sensor installations are possible. registered automatically. l Thetire pressure sensor is removed NOTE from the old wheel and installed to the newone. If the vehicle is driven within about 15 minutes l Thesametire pressure sensor is used of changing tires, the tire pressure monitoring with the same wheel. Only the tire is system warning light will flash because the replaced. sensor ID signal code would not have been l Anewtirepressure sensor is installed registered. If this happens, park the vehicle for to a new wheel. about 15 minutes, after which the sensor ID signal code will register upon driving the NOTE vehicle for 10 minutes. l Thetire pressure sensor ID signal code must be registered when a new tire pressure sensor is purchased. For purchase of a tire pressure sensor and registration of the tire pressure sensor ID signal code, consult an Authorized Mazda Dealer. l Whenreinstalling a previously removed tire pressure sensor to a wheel, replace the grommet (seal between valve body/sensor and wheel) for the tire pressure sensor. 5-35 Form No.8EN7-EA-14E

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders