owners manual Hyundai Getz

all ratings: 0 average rating: 5

4- 4 CORROSION PREVENTION AND APPEARANCE CARE trol chemicals are used, you shouldTo clean cast aluminum alloy wheels, If you find any nicks or scratches in pay particular attention to the under-use a mild soap or neutral detergent.the paint, use touch-up paint to cover side of the car. Start by rinsing the carDo not use abrasive cleaners. Protect them to prevent corrosion. To protect to remove dust and loose dirt. In win- the bare-metal surfaces by cleaning,the paintwork of the car against corro- ter, or if you have driven through mud polishing and waxing. Because alumi- sion, you must clean your Hyundai (at or muddy water, be sure to thoroughly num is subject to corrosion, be sure to least once a month). Give special at- clean the underside as well. Use agive aluminum alloy wheels specialtention to the removal of salt, mud and hard direct stream of water to remove attention in winter. If you drive onother substances on the underside of accumulations of mud or corrosivesalted roads, clean the wheels thor-the splashboards of the car. Make materials. Use a good quality car-wash- oughly afterwards. sure that the outlets and the underside ing solution and follow theof the doors are open. Paint damage manufacturer's directions on the pack- After washing, be sure to rinse thor-can be caused by small accumulation age. These are available at youroughly. If soapy water dries on theof tar, industrial precipitation, tree resin, Hyundai dealer or auto parts outlet.finish, streaking will result. insects and bird droppings, when not Don't use strong household detergents, removed immediately. If water alone is gasoline, strong solvents or abrasiveWhen the weather is warm and thenot strong enough to remove the accu- cleaning powders as these may dam- humidity low, you may find it neces-mulated dirt, use a mild car washing age the finish. sary to rinse each section immediately solution. Be sure to rinse the surface Use a clean sponge or cloth, rinse itafter washing to avoid streaking. after washing to remove the solution. frequently and don't damage the finish Never allow the solution to dry on the by rubbing too hard. For stubborn spots, After rinsing, dry the car using a damp painted surfaces. dampen them frequently and remove chamois or soft, absorbent cloth. The them a little at a time. reason for drying the car is to remove To clean whitewall tires, use a stiffwater from the car so it will dry without brush or soapy steel-wool scouringwater spots. Don't rub, this can dam- pad. age the finish. To clean plastic wheel covers, use a clean sponge or soft cloth and water. TBENG_4.P65 4 6/14/2005, 3:29 PM

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders