owners manual Seat Mii

all ratings: 0 average rating: 5

Advice Foreign bodies in the tyretyres wear too quickly, have the wheel align-The tyre control lamp compares wheel revolu- ment checked at a specialised workshop.tions and with it, the wheel diameter of each ●Do not remove foreign bodies if they have wheel using the ESC. If the diameter of a penetrated through the tyre wall! WARNING wheel changes, the tyre control lamp  ●You should obtain professional assistance lights up. The wheel diameter changes when: If you notice unusual vibration or the car pulls immediately. to one side while driving, this may indicate ●Tyre pressure is insufficient. that one of the tyres is damaged. Wear of tyres ●The tyre structure is damaged. ● Reduce speed immediately and stop, while The wear of tyres depends on a number of ●The vehicle is unbalanced because of a observing the highway code. factors, for example: load. ● Check the wheels and tyres for damage. ●The wheels of one axle are under more ●Driving style. ● Never carry on driving on worn tyres or pressure (for example, driving with a trailer or wheels. Request qualified assistance immedi- ●Unbalanced wheels. ately. on steep slopes). ●Running gear settings. ● If there is no visible exterior damage, drive●The vehicle is fitted with snow chains. slowly and carefully to the nearest special- Driving style: Driving round bends quickly or ●The temporary spare wheel is fitted. ised workshop and have the vehicle checked. sudden acceleration or braking speed accel- ●The wheel on one axle is changed. erates tyre wear. When the driving style is normal, if the tyres wear too quickly, have the Tyre pressure adjustment running gear settings checked at a special-Tyre monitoring system*  On adjusting tyre pressure or changing one ised workshop. or more wheels, the ››› Fig. 117 button must Wheel run-out: The wheels on new vehicles be kept pressed down, with the ignition on, are balanced. However, certain circumstan- until an acoustic signal is heard. ces may lead to imbalance (run-out), which is If the wheels are under excessive load (for ex- detected as vibrations in the steering wheel. ample, driving with a trailer or heavy load), Run-out leads to wear of the steering and the tyre pressure must be increased to the suspension. In the event of run out, the recommended value for a full load (see the wheels should be balanced again. When a sticker on the inside of the fuel flap). If the new wheel is fitted, it should be balanced tyre monitor system button is pressed down, again. the new tyre pressures are confirmed. Running gear settings: an incorrectly posi- Fig. 117 Centre console: tyre monitor system tioned running gear increases the wear of button tyres and affects your safety while driving. If 164

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders