owners manual Seat Mii

all ratings: 0 average rating: 5

Wheels and tyres Wheel rims with bolted trims s Replacement of wheel rims and new WARNING tyres Wheel rims may be fitted with interchangea- New tyres do not give maximum grip and willation ble trim parts which are attached to the rim ific not have reached their maximum braking ca- New tyres using self-locking bolts. Worn trims should pacity to start with, and therefore need run-pec s only be replaced at a specialised workshop.● ning in. When tyres are new, drive with extreme al SEAT recommends visiting a technical service caution for the first 600 km, as all tyres need● To prevent accidents and major damage, hnic ››› . to be run-in. Tyres which have not been run-extreme caution should be taken for the firstec T in do not have such good grip ››› or brak-600 km. WARNING ing capacity ››› . The use of worn or damaged wheel rims could●All four wheels must be fitted with radial WARNING make driving more dangerous and result in e tyres of the same type, size (rolling circumfer- There should be adequate space between theic serious accidents and damage. ence) and the same tread pattern. tyres and the vehicle in accordance with the ● Adv Only wheel rims which have been approved ●The tread depth of new tyres may vary, ac-vehicle design. If this is not the case, the for use with your vehicle should be used. cording to the type and make of tyre and thetyres may rub against parts of the running ● Inspect wheel rims regularly for damage gear, chassis or brake lines, leading to faults tread pattern. and replace as required. in the brake system or to tread detachment, and the risk of burst tyres. Replacing tyres ● The true tyre dimension should not be WARNING ●Where possible, always replace both greater than the dimensions of tyres manu- If the bolted joints of wheel rims with boltedwheels on an axle (both wheels on the front ation factured and approved by SEAT and should ring trims are not correctly tightened or loos-axle or both wheels on the rear axle) ››› . not rub against parts of the vehicle. ened, this could result in serious accident. Oper ●Only replace used tyres with those author- ● Never loosen the bolted joints of wheel ised by SEAT for the corresponding type vehi- Note rims with bolted ring trims. cle. Pay special attention to size, diameter, Although tyres may be shown as being the ● Any work relating to wheel rims with boltedand maximum load and speed capacity. same size, the true dimensions of different rims should be carried out at specialised ●Never use tyres which are larger than SEAT types of tyre may vary with respect to the workshop. SEAT recommends taking your car approved tyres. If the tyres are too big, they nominal size, or tread patterns may be differ- in for technical service. ety may knock or rub against the chassis or other ent. Saf components, resulting in damage. Note If you use tyres that are approved by SEAT, you can be sure that the true tyre dimensions » 161

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders