owners manual Mini Clubman

all ratings: 0 average rating: 5

Replacing components MOBILITY 1. Place the jack at the jacking point closest to Replace the defective tire as soon as possible the wheel. and have the new wheel/tire assembly bal- The jack base must be perpendicular to the anced. surface beneath the jacking point. Vehicle battery Maintenance The battery is 100% maintenance-free, the electrolyte will last for the life of the battery when the vehicle is operated in a temperate cli- mate. 2. During jacking up, insert the jack head in the Battery replacement square recess of the jacking point. Only use vehicle batteries that have been 3. Jack the vehicle up until the wheel you are approved for your vehicle by the manu- changing is raised off the ground.facturer; otherwise, the vehicle could be dam- aged and systems or functions may not be fully Mounting the space-saver spare tire available.< 1. Unscrew the lug bolts and remove the After a battery replacement, have the battery wheel. registered on the vehicle by your dealer to ensure that all comfort functions are fully avail- 2. Remove accumulations of mud or dirt from able. the mounting surfaces of the wheel and hub. Clean the lug bolts. Charging the battery 3. Lift the new wheel into place. Only charge the battery in the vehicle when the 4. Screw at least two lug bolts finger-tight into engine is off. Connections, refer to Jump-start- opposite bolt holes. ing on page157. 5. Screw in the remaining bolts. Disposal 6. Tighten all the lug bolts firmly in a diagonal After replacing old batteries, return the pattern. used batteries to your MINI dealer or to a 7. Lower the vehicle. recycling center. Maintain the battery in an 8. Remove the jack. upright position for transport and storage. Always secure the battery against tipping over Tightening the lug bolts during transport.< Tighten the lug bolts in a diagonal pattern. Immediately have the wheels checked Power failure with a calibrated torque wrench to ensure After a temporary power loss, some equipment that the lug bolts are firmly seated. Otherwise, may not be fully functional and may require ini- incorrectly tightened lug bolts can present a tialization. Individual settings are also lost and safety hazard.< must be reprogrammed: Tightening torque: 103.3 lb ft or 140 Nm. Online Online Edition Edition for for Part Part no. no. 01 01 40 40 2 2 607 607 326 326 - - © © 03/11 03/11 BMW BMW AGAG 155

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders