owners manual Mini Clubman

all ratings: 0 average rating: 5

MOBILITY Replacing components 3 Holder for the sealant bottle 4.Unscrew the dust cap from the valve of the 4 Compressor defective wheel and screw the filling hose 2 5 Plug and cable for the socket in the vehicle of the sealant bottle onto the valve. interior, page 87 5.Ensure that the compressor is switched off. 6 Connection hose to connect the compressor 6.Insert the plug5 into the lighter socket/ and sealant bottle or the compressor and power socket in the vehicle interior, wheel page87. 7 On/off switch 7.With the engine running: 8 Pressure gauge for indicating the tire infla-Switch on the compressor and let is run for tion pressure approx. 3 to 8 minutes to fill the tire with sealant and achieve a tire inflation pressure 9 Release button for reducing the tire inflation of approx. 26 psi/180 kPa. pressure When filling the tire with sealant, the Connector, cable and connection hose are inflation pressure can briefly rise to stored in the compressor housing. approx. 73 psi/500 kPa. Do not switch off the compressor during this phase.< Using the Mobility System Do not run the compressor for longer To repair a tire puncture with the Mobility Sys-than 10minutes; otherwise, the tem, proceed as follows: device will overheat and possibly be dam- > Filling the tire with sealant aged.< > Distributing the sealant 8.Switch off the compressor. > Correct the tire inflation pressureIf an air pressure of 26 psi/180 kPa is not reached: Filling the tire with sealant 1.Unscrew the filling hose 2 from the wheel Proceed in the specified order; otherwise, and drive the vehicle forward and backward sealant may emerge under high pres-approx. 33 ft/10 m to distribute the liquid sure.< sealant in the tire evenly. 1. Shake the sealant bottle. 2.Inflate the tire again with the compressor. 2. Pull the connecting hose 6 completely out of If an inflation pressure of 26 psi/180 kPa the compressor housing and screw it onto still cannot be reached, the tire is too the connector of the sealant bottle. Make heavily damaged. Please contact the nearest sure that the hose is not kinked.MINI dealer.< 3. Insert the sealant bottle on the compressor housing in an upright position. 152 Online Online Edition Edition for for Part Part no. no. 01 01 40 40 2 2 607 607 326 326 - - © © 03/11 03/11 BMW BMW AGAG

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders