owners manual Skoda Fabia

all ratings: 0 average rating: 5

Press and hold the button   » Fig. ĖĘĕ for longer than ė seconds. 3hile › 0yre control display pressing the button, the warning light  illuminates. At the same time the sys- tem memory is erased and the new calibration is started, which is confirmed with an audible signal and then the warning light  goes out. Fig. ĖĘĕ ›If the warning light  does not go out after the basic setting, this indicates a Button for setting the tyre infla- system fault. Seek help from a ŠKODA specialist garage. tion pressure control value 0he warning light  is lit If the tyre inflation pressure of at least one wheel is insufficiently inflated in com- parison to the stored basic value, the warning light  » lights up. 0he warning light  flashes If the warning light flashes, there is a system fault. Seek help from a ŠKODA spe- cialist garage to correct the fault. First read and observe the introductory information and safety warn- äings on page ĖĚĕ. 3ARNING 0he tyre control display compares the speed and thus the rolling circumference of■ 3hen the warning light  illuminates, immediately reduce the speed and the individual wheels with the help of the ABS sensors. If the rolling circumfer-avoid sudden steering and brake manoeuvres. Stop the vehicle as soon as ence of a wheel is changed, the warning light  in the instrument clus- possible and inspect the tyres and their inflation pressure. ter » page ėĘ, Tyre control display  and an audible signal sounds. ■ 1nder certain circumstances (e.g. sporty style of driving, wintry or unpaved roads) the warning light  can be delayed or does not light up at all. 0he rolling circumference of the tyre can change if: ■ 0he tyre control display does not absolve the driver of the responsibility to ›the tyre inflation pressure is too low; ensure the correct tyre inflation pressure. For this reason, the tyre inflation ›the structure of the tyre is damaged; pressure must be checked regularly. ›the vehicle is loaded on one side; ›the wheels of an axle are loaded heavily (e.g. when towing a trailer or when driving uphill or downhill); Note ›snow chains are mounted; ■ 0he tyre control display does therefore not replace the regular tyre inflation ›the temporary spare wheel is mounted; pressure control, as the system cannot detect an even loss of pressure. ›one wheel per axle was changed. ■ 0he tyre control display cannot provide a warning in the event of very rapid tyre Basic setting of the system inflation pressure loss, e.g. in the case of sudden tyre damage. In this case care- fully bring the vehicle to a standstill without sudden steering movements or After changing the tyre inflation pressure, after changing one or several wheels, sharp braking. the position of a wheel on the vehicle (e.g. exchanging the wheels between the ■ 0o ensure a proper functioning of the tyre control display, it is necessary to re- axles) or when the warning light lights up while driving, a basic setting of the sys- Ð peat the basic setting every Ėĕ ĕĕĕ km or once a year. tem must be carried out as follows: ›Inflate all of the tyres to the specified inflation pressure » page ĖĚĖ, Service life of tyres. ›Switch on the ignition. 3heels and 0yres ĖĚĚ

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders