owners manual Seat Toledo

all ratings: 0 average rating: 5

Advice – Tighten the wheel bolts firmly in diagonal Wheel bolts Note sequence with the box spanner and then ● If you notice that the wheel bolts are rusty The wheel bolts are matched to the rims.the anti-theft wheel bolt ››› page 152. and difficult to turn when changing a wheel, When installing different wheels, e.g. to fit – Replace the hub cap and/or the bolt cov-they must be replaced before having the light alloy wheels or wheels with winter tyres, ers. tightening torque checked. it is important to use the correct wheel bolts ● Drive carefully and at moderate speeds un- with the right length and correctly shaped Note til the tightening torque of the wheel bolts bolt heads. This is essential for a secure fit of has been checked. ● All bolts must be clean and turn easily. the wheels and for proper operation of the brake system. ● Never grease or oil the wheel bolts! ● Note the direction of rotation when putting Loosening and tightening wheel bolts on a tyre with a directional tread pattern Changing a wheel ››› page 144. If possible, change the wheel on a level sur- face. After changing a wheel – ››› Pull off the hub cap page 151 or the Tasks that must be carried out after changing wheel bolt covers ››› page 151. a wheel: – First loosen the anti-theft wheel bolts and – Place the wheel with the defective tyre in then the other wheel bolts ››› page 152. the spare wheel well and secure it using a – Raise the vehicle until the wheel to be special bolt ››› page 146. changed is no longer touching the ground Fig. 124 Changing a wheel: loosen the wheel – Put the vehicle tools back in their storage ››› page 153. bolts. location. – Remove the wheel bolts and place them on – Check the tyre pressure of the newly fitted a clean surface (cloth, paper, etc.). spare wheel as soon as possible. – Take off the wheel. – Have the tightening torque of the wheel – Lift the spare wheel into position and tight- bolts checked as soon as possible with a en the wheel bolts lightly. torque wrench. – Lower the vehicle. – Have the flat tyre replaced or ask an Official Service about the possibility of repair. 152

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders