instrukcja obsługi Suzuki SX4 S Cross Suzuki SX4 S Cross owners manual page 151

text version of content this owner's manual page from owners manual to the vehicle Suzuki SX4 S-Cross, year of production 2013:

OPERATING YOUR VEHICLE If you are unable to start the engine using Restarting diesel engine after fuel- this procedure, consult your SUZUKI empty stop EXAMPLE dealer. If the engine stops and the low fuel warn- ing light and the malfunction indicator light (For Diesel Engine Model) come on, use the following procedure: Cold engine 1) Fill the fuel tank. Depress the clutch and brake pedals fully 2) Press the engine switch to change the and press the engine switch to crank the ignition mode to "ON" for 5-10 seconds engine. If the glow plug indicator light to feed fuel. comes on, the engine will start automati-3) Perform above engine starting proce- cally after the glow plug indicator light goes dure to start the engine. 10 seconds past. If the malfunction indicator light still comes off or on after the engine started, there may be NOTICE some problem with the engine. Ask your SUZUKI dealer to have the engine 58MST0302 Do not crank the engine for more inspected. 1) Make sure the parking brake is set fully. than 30 seconds at a time. If the master warning indicator light 2) Manual Transaxle - Shift to "N" (Neu- If the engine doesn't start on the first blinks and the engine cannot be started tral) and fully depress the clutch pedal. try, wait about 15 seconds before try- Your keyless push start system remote Hold the clutch and brake pedals fully ing again. controller may not be sensed as being depressed. within the "interior workable area". Try CVT - If the gearshift lever is not in the Warm engine again after making sure that you have the "P" (Park) position, shift it to "P". Hold Crank the engine by pressing the engine remote controller with you. If the engine the brake pedal fully depressed. switch to change the ignition mode to still cannot be started, the battery of the 3) The "PUSH START SWITCH." mes- "START". remote controller may be discharged. You sage will appear on the information dis- must then use the following method to be play in the instrument cluster. Press the Caution when stopping the engine with able to start the engine. engine switch (1). turbocharger 4) Within about 10 seconds of blinking of When stopping the engine after climbing or the master warning indicator light in the high speed driving, let the engine idle for instrument cluster, touch the engine about one minute or more (if it is not pro- switch with the "LOCK" button end of hibited) to cool down the turbocharger and the remote controller (2) for about 2 engine oil. This is to prevent the engine oil seconds. from over-deteriorating. Deteriorated engine oil will damage the bearings of the turbocharger. 3-16