Audi A4 B8 owners manual page 149

text version of content this owner's manual page from owners manual to the vehicle Audi A4, year of production 2008 - 2015:

document_0900452a81b1b9de.book Seite 147 Donnerstag, 26. Juli 2007 9:16 09 Audi lane assist 147 • Unfilled lines: The lane assist is switched on but not ready for The system should be checked by an Audi dealership or other qual- warning ⇒page146, fig. 161, A ified workshop. A Version B : High-resolution display A • Solid white lines: The lane assist is switched on and ready to Applies to vehicles: with lane assist warn. Setting the warning time and steering • Solid red line (left or right): The lane assist warns you before you vibration cross the lane demarcation ⇒ page 146, fig. 160. You can change the lane assist settings on the sound • Unfilled lines: The lane assist is switched on but not ready for system or MMI* to suit your individual preferences. warning ⇒page146, fig. 161. Messages in the instrument cluster display Should the lane assist be deactivated automatically, the indicator lamp in the instrument cluster will go out and one of the following messages will appear in the instrument cluster display: Audi lane assist not available: currently no sensor vision This message is displayed when the camera is no longer functional Fig. 162 Display: after the system has continuously failed to detect the lane mark- Setting time of ings. This can have the following causes: warning and steering vibration • The outside of the camera window ⇒ page 145, fig. 159 is dirty or frosted. Please remove dirt or ice from this area of the wind-– Select: Function selector button CAR > Audi lane assist. screen. • The inside of the camera window is misted up. In this case, Setting time of warning please wait for the camera window to demist before switching on early: In this setting, the driver will be warned before a wheel the lane assist system again. crosses a lane marking. The warning depends on the angle with • Due to the conditions (e.g. snow-covered road) the system has which the vehicle is approaching the lane marking. The larger the not been able to detect the lane markings for a long period. Do not angle with which you are driving towards the marking, the earlier switch the lane assist system on again before the lane markings are you will receive the warning, i.e. the distance between the vehicle discernible. and the marking might still be still relatively long. If you are driving toward the marking at a very narrow angle, you will receive the Audi lane assist currently not available warning later, i.e. shortly before one of the wheels touches the A temporary error is preventing the lane assist system from fully marking. functioning. Try switching on the lane assist system again later.adaptive: In this setting, the time of warning is adapted to the road Audi lane assist: system fault layout and the vehicle's speed. The warning will be received later when you are driving through a bend, and earlier when you are Controls Safety Driving tips General maintenance Self-help Technical data

owners manual Audi A4

owners manual Audi A4 - year of production: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 - Audi A4 B8 owners manual EN