Infiniti Q50 Hybrid owners manual page 147

text version of content this owner's manual page from owners manual to the vehicle Infiniti Q50 Hybrid, year of production 2013:

button. During programming, your hand- mitted. CLEARING THE PROGRAMMED IN- held transmitter may automatically stop For convenience, the hand-held transmitter FORMATION transmitting. Continue to press and hold of the device may also be used at any time. The following procedure clears the pro- the desired HomeLink® button while you press and re-press (“cycle”) your hand- PROGRAMMING TROUBLESHOOT- grammed information from both buttons. held transmitter every two seconds until ING Individual buttons cannot be cleared. the frequency signal has been learned.The ® However, individual buttons can be repro- ® If the HomeLink does not quickly learn grammed, see “Reprogramming a single HomeLink indicator light will flash slowly the hand-held transmitter information: ® and then rapidly after several seconds HomeLink button” (P.2-64). upon successful programming. DO NOT . replace the hand-held transmitter bat- To clear all programming release until the HomeLink® indicator light teries with new batteries. flashes slowly and then rapidly. When the . position the hand-held transmitter with 1. Press and hold the two outer ® indicator light flashes rapidly, both buttons its battery area facing away from the HomeLink buttons until the indicator ® light begins to flash in approximately may be released. The rapid flashingHomeLink surface. 10seconds.Donotholdforlongerthan indicates successful programming. . press and hold both the HomeLink® 20 seconds. Proceed with “Programming HomeLink®” and hand-held transmitter buttons step 3 to complete. without interruption. 2. Release both buttons. ® Remembertoplugthedevicebackinwhen . position the hand-held transmitter 1-3 HomeLink is now in the programming mode and can be programmed at any time programming is completed. in (26-76 mm) away from the ® beginning with “Programming HomeLink®” HomeLink surface. Hold the transmit- OPERATING THE HomeLink® UNI- ter in that position for up to 15 - Step 1. ® VERSALTRANSCEIVER seconds. If HomeLink is not pro- REPROGRAMMING A SINGLE The HomeLink® Universal Transceiver, after grammed within that time, try holding HomeLink® BUTTON it is programmed, can be used to activate the transmitter in another position - ® the programmed device.To operate, simply keeping the indicator light in view at allTo reprogram a HomeLinkUniversal press and release the appropriate pro- times. Transceiver button, complete the following. grammedHomeLink®UniversalTransceiver If you have any questions or are having 1. Press and hold the desired HomeLink® ® button. The amber indicator light will difficulty programming your HomeLink button. Do not release the button. buttons, refer to the HomeLink® web site illuminate while the signal is being trans- at: www.homelink.com or 1-800-355-3515. 2-64 Instruments and controls

owners manual Infiniti Q50 Hybrid

owners manual Infiniti Q50 Hybrid - year of production: 2013 - Infiniti Q50 Hybrid owners manual EN