Infiniti Q50 Hybrid owners manual page 146

text version of content this owner's manual page from owners manual to the vehicle Infiniti Q50 Hybrid, year of production 2013:

stand on your vehicle to perform the ® HomeLinkweb site at: www. next steps. homelink.com or call 1-800-355-3515. 4. At the receiver located on the garage PROGRAMMING HomeLink® FOR door opener motor in the garage, locate CANADIAN CUSTOMERS AND GATE the “learn” or “smart” button (the OPENERS name and color of the button may vary Canadian radio-frequency laws require by manufacturer but it is usually located near where the hanging anten- transmitter signals to “time-out” (or quit) na wire is attached to the unit). If thereafter several seconds of transmission – is difficulty locating the button, refer-which may not be long enough for ® ence the garage door opener’s manual. HomeLink to pick up the signal during 5. Press and release the“learn” or programming. Similar to this Canadian “smart” button. law, some U.S. gate operators are de- JVI0429X signed to “time-out” in the same manner. NOTE: 3. Press and hold the programmed If you live in Canada or you are having ® Once the button is pressed, you have HomeLink button and observe the difficulties programming a gate operator or indicator light. approximately 30 seconds to initiate garage door opener by using the “Pro- . Ifthe indicator light 1 is solid/ the next step. ® gramming HomeLink * ” procedures, re- continuous, programming is com- 6. Return to the vehicle and firmly press place “Programming HomeLink®” Step 2 plete and your device should acti- and hold the programmed HomeLink® with the following: vate when the HomeLink® button is button for two seconds and release. pressed and released. Repeat the “press/hold/release”se- NOTE: . If the indicator light 1 blinks quence up to 3 times to complete the Whenprogramming a garage door opener, * ® etc., unplug the device during the “cy- rapidly for two seconds and then programming process. HomeLink turns to a solid/continuous light, should now activate your rolling code cling” process to prevent possible damage continue with Steps 4-6 for a rolling equipped device. to the garage door opener components. code device. A second person may 7. If you have any questions or are having Step 2: Using both hands, simultaneously makethefollowing steps easier. Use press and hold the desired HomeLink® difficulty programming your a ladder or other device. Do not ® button and the hand-held transmitter HomeLink buttons, refer to the Instruments and controls2-63

owners manual Infiniti Q50 Hybrid

owners manual Infiniti Q50 Hybrid - year of production: 2013 - Infiniti Q50 Hybrid owners manual EN