Alfa Romeo 33 owners manual page 144

text version of content this owner's manual page from owners manual to the vehicle Alfa Romeo 33, year of production 1983 - 1995:

COMPLETE CAR (4) Maneuverability of control leverBODY must result to be easy and smooth LOCKS AND HINGES running and when control lever is engaged hooking tooth must be into 1. Lubricate hinges and locks. 2. Adjust lock striker plates. its seat in the scroll gear without difficulty. CHECKING SEAT BELTS CAUTION: . If seat belts have to be washed, do not use chemical detergents carry out travel 3. If required, or solvents since they could STEERING SYSTEM adjustment by operating on nut and damage the buckles. 1. Check steering for sticking or . lock nut of adjustment fork located After a serious accident involv- under passenger compartment centralstiffness when turning wheels in bath ing belt stress, replace same even console. directions, if apparently it does not seem to 2. Rotate steering wheel clockwise be damaged. and anticlockwise checking steering system for excessive play. For 1. Check anchors making sure they relevant refer to: adjustment are not loose on mountings. Group 23 - Checks and Inspections - 2. Check belts for wear. Guide Tube. Rack Box and 3. Check proper working condition where required, all 3. Tighten, of buckles and tongues, 4. Besides, verify the following: steering system connecting points. 4. Fasten seat belts and check if in (1) With control lever in the test (Refer to: Group 23 - Tightening case of sudden movement they are position also jaws must be at t-est. torques). promptly locked. Contrarywise, (2) When operating control lever, tables must slide freely. 4. Check condition of steering boxcheck retractors’ locking system. protecting boots and replace them if (3) Indicator lamp must switch on necessary. If condition of any seat belt compo- within one click of parking brake 5. Check steering rod bal1 and control lever and switch off as soon nent is questionable, replace the flexible joints; replace them if worn. entire belt assembly involved. as control lever is at rest position. SERVICE DATA AND SPECIFICATIONS ENGINE MAINTENANCE TECHNICAL DATA - INSPECTION AND ADJUSTMENT Engine Engines 1200 I 1350 1500 Valve clearance (cold engine) Intake mm (in) 0.35GO.40 (0.014+0.016) Exhaust mm (in) 0.45t0.50 (0.018+0.020) Alternator-pump belt tension Force applied to belt N (kg, lb) 79 (8 ;3.63) Deflection mm (in) 15 (0.59) Cylinder compression kPa (bar , p.s.i. , kg/cm2) 1030 (10.30,149.39;10.5) Min compression pressure Max compression difference 98 (0.98 ; 14.22 ; 1) between cylinders kPa (bar, p.s.i., kg/cm2) 00-45 May 1983

owners manual Alfa Romeo 33

owners manual Alfa Romeo 33 - year of production: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 - Alfa Romeo 33 owners manual EN