owners manual Seat Cordoba

all ratings: 0 average rating: 5

COR_ING_0707 Seite 136 Mittwoch, 1. August 2007 6:25 18 136 Driving N - neutral (idling) To take the lever out of position N at speeds of below 5 km/h or when the car Note is at a standstill but the ignition is switched on, depress the brake pedal and The selector lever can be placed in positions 3, 2 and 1 when the change is press the lock button on the gearstick knob. made manually, but the automatic gearbox does not change to a lower gear until the number of revolutions is appropriate. D - Drive (forwards) The four gears automatically change up or down, depending on engine load and vehicle speed. Kick-down feature In certain conditions it is preferable to place the selector lever provisionally in one of the positions described below: This system allows maximum acceleration. When the accelerator is 3 - Position for uneven surfaces depressed to full throttle, and depending on the vehicle speed and engine Gears 1st, 2nd and 3rd automatically change up or down depending on the speed, the lowest gear is engaged. As soon as the maximum engine speed engine load and vehicle speed. 4th gear is blocked. This increases the engine for that gear is reached, the next gear up is engaged. braking effect when decelerating. This position is recommended when in position D and under certain driving WARNING conditions, there are frequent changes between 3rd and 4th.Remember that the drive wheels may skid if the kick-down feature is acti- 2 - Position for hilly roads vated when driving on icy or slippery roads. Danger of skidding! Position recommended for long slopes. 1st and 2nd gear change automatically depending on engine load and Instructions for driving vehicle speed. 3rd and 4th do not operate. 1 - Position for very steep slopes or manoeuvres Starting Recommended position for extreme slopes. The engine can only be started when the selector lever is at N or P The vehicle only travels in 1st gear. 2nd, 3rd and 4th are blocked.⇒page130. The cruise control* can not be used in position 1.Selecting a range When the car is at a standstill and the engine is running, always depress the Caution brake pedal before selecting a range. Never move the selector lever to R or P when driving. This could damage the Do not accelerate on selecting a range when the engine is at a standstill gearbox. Risk of accident!

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders