Audi A4 B8 owners manual page 138

text version of content this owner's manual page from owners manual to the vehicle Audi A4, year of production 2008 - 2015:

document_0900452a81b1b9de.book Seite 136 Donnerstag, 26. Juli 2007 9:16 09 136 adaptive cruise control (ACC) • Vehicle in front: If a vehicle is detected in front, the arrows will be Applies to vehicles: with adaptive cruise control on the scale. The green area of the scale represents the distance System status indicator in the instrument setting. If you approach the vehicle in front slowly, the arrows will cluster display move from the grey area into the green area of the scale. • Driver intervention prompt: If you approach the vehicle in front The text messages and symbols in this section of the quickly, the arrows act as a warning. When the actual distance is display are not shown permanently. shorter (or is likely to become shorter) than the distance selected, the arrows move into the red area of the scale. In certain situations, you may need to intervene as the driver ⇒ page 138, “Driver inter- vention prompt”. C A Status • ACC OFF (in white letters): The adaptive cruise control is switched off. • ACC AVAILABLE (in white letters): The system is switched on but Fig. 146 Instrument the control has not yet been activated. cluster: Further infor- • OVERRIDE (in white letters): You have exceeded the target speed mation by accelerating. Time intervals (e.g. ) • DISTANCE! (in red letters): The distance to the vehicle in front is The various symbols for the time intervals -arrow- ⇒ fig. 146 appear not sufficient and you have to brak e the vehicle with the foot brake.when you change the settings. • DISTANCE 1 to DISTANCE 4 (in green letters): Shows the time  interval you have selected. The adaptive cruise control is in cruise mode. The symbol  indicates that the warning tone has been switched • DISTANCE 1 - dyn., DISTANCE 1 - comf. etc. (in green letters): If off. the settings are adjusted on the sound system or MMI* such that . the “standard” driving program is replaced by “comfort” or The text message . (three white dots) appears if a setting made “dynamic”, the message above will indicate the setting. with the control lever cannot be implemented. There can be several reasons for this: • You have pulled the control lever towards you to resume the programmed cruising speed, without a target speed having been set. • The control lever has been pushed up / down to increase / reduce the speed, without a target speed having been set.

owners manual Audi A4

owners manual Audi A4 - year of production: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 - Audi A4 B8 owners manual EN