owners manual Nissan Altima

all ratings: 0 average rating: 5

Proceed with “Programming HomeLink®”● press and hold both the HomeLink® andTo clear all programming: step 3 to complete. hand-held transmitter buttons without inter-1. Press and hold the two outer HomeLink® If the device was unplugged during the pro-ruption. buttons until the indicator light begins to gramming procedure, remember to plug it● position the hand-held transmitter 1 -flash in approximately 10 seconds. Do not back in when programming is completed.3 inches (26 - 76 mm) away from thehold for longer than 20 seconds. OPERATINGTHEHOMELINK® HomeLink®surface. Hold the transmitter in2. Release both buttons. UNIVERSALTRANSCEIVER that position for up to 15 seconds. If HomeLink® is not programmed within thatHomeLink® is now in the programming mode The HomeLink® Universal Transceiver, after it istime, try holding the transmitter in anotherand can be programmed at any time beginning programmed, can be used to activate the pro-position – keeping the indicator light in viewwith “Programming HomeLink®”- Step 1. grammed device. To operate, simply press andat all times. REPROGRAMMINGASINGLE releasethe appropriateprogrammedIf you have any questions or are having difficultyHOMELINK®BUTTON HomeLink® Universal Transceiver button. Theprogramming your HomeLink® buttons, refer to amberindicator light will illuminate while the sig-the HomeLink® web site at: www.homelink.comTo reprogram a HomeLink® Universal Trans- nal is being transmitted. or call 1-800-355-3515. ceiver button, complete the following: Forconvenience,thehand-heldtransmitteroftheCLEARINGTHEPROGRAMMED1. PressandholdthedesiredHomeLink®but- device may also be used at any time.INFORMATION ton. DO NOT release the button. PROGRAMMINGTROUBLE- The following procedure clears the programmed2. The indicator light will begin to flash after DIAGNOSIS information from both buttons. Individual buttons20seconds.Withoutreleasingthe cannot be cleared. However, individual buttonsHomeLink® button, proceed with “Pro- Ifthe HomeLink® does not quickly learn thecan be reprogrammed. For additional informa-gramming HomeLink®”- Step 1. hand-held transmitter information:tion,referto“ReprogrammingasingleForquestionsorcomments,contactHomeLink® ● replace the hand-held transmitter batteriesHomeLink®button”in this section.at: www.homelink.com or 1–800–355–3515 with new batteries. (except Mexico). ● position the hand-held transmitter with its batteryareafacingawayfromthe HomeLink®surface. 2-58 Instruments and controls

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders