owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 121 Friday, April 9, 2010 2:24 PM Automatic gearbox DSG* 121 Caution A R - Reverse gear  The double clutch on the automatic gearbox DSG is equipped with an overload Reverse gear must only be engaged when the vehicle is stationary and the engine protection. If you make use of the uphill function on a vehicle which is stationary or idling  . driving slowly uphill, it will result in an increase of thermal stress of the clutches. The brake pedal must be depressed and at the same time the Shiftlock must be  In the event that they overheat, the warning light  and a warning text  page 37 pressed, if you wish to obtain the selector lever positions R, P or N. appear in the information display*. In such a case bring the vehicle to a stop, switch off When the ignition is switched on and the selector lever is in position R, the reverse the engine and wait until the warning light and the warning go out - risk of gearbox lights will come on. damage! You can continue the trip as soon as the warning light and the warning go out. A N - Neutral The transmission is in Neutral in this position. Selector lever positions The brake pedal must be depressed (if the lever is in its position for longer than 2 seconds) in order to move the selector lever out of the position N into the position D or R, with the ignition switched on, on a vehicle travelling at less than 5 km/hour or on a stationary vehicle. A D - Position for driving forward When the selector lever is in this position, the forward gears are shifted up and down automatically in line with engine load, vehicle speed and the dynamic shift programme. You must depress the brake pedal if you wish to move into position D from N when the vehicle is travelling at less than 5 km/hour or is stationary  . Fig. 115 Selector lever / information display: Selector lever positions In certain circumstances (e.g. when driving in mountainous regions or when towing a The current selector lever position is indica ted in the information display of the instru- trailer) it may be beneficial to select the manual shift programme  page 123 for a ment cluster fig.115 - right. In the positions D and S the gear you have already short time in order to adapt the gearbox ratios manually to the driving situations. engaged will be additionally displayed on the display. A S - Position for sporty style of driving A P - Parklock Shifting up later into a higher gear makes it possible to fully exploit the power potential The driven wheels are locked mechanically in this position. of the engine. The gearbox also then shifts down at higher engine speeds as in the posi- tion D. The Parklock must only be engaged when the vehicle is stationary  . The Shiftlock on the selector lever grip must be pressed when moving the selector If you wish to move the selector lever into or out of this position, you must press the lever out of the position D into the position S. Shiftlock button in the handle of the selector lever and at the same time depress the brake pedal. If the battery is used, the selector lever cannot be moved out of the position P. Using the system Safety Driving Tips General Maintenance Breakdown assistance Technical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders