owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 120 Friday, April 9, 2010 2:24 PM 120 Automatic gearbox DSG* Automatic gearbox DSG* Automatic gearbox DSG* – Apply the handbrake firmly. – Press and Shiftlock button in the selector lever, move the selector lever to P and Introduction then release the Shiftlock button. Your car is equipped with an automatic gearbox DSG. The abbreviation DSG means The engine can only be started when the selector lever is in position P or N Direct shift gearbox (Direct shift gearbox). page109. At temperatures below -10 °C the engine can only be started in the Two independent clutches are needed for the power transmission between the engine selector lever position P. and the gearbox. These replace the torque converter of the conventional automatic It is sufficient to engage selector lever position P when parking on a flat surface. When gearbox. Their shifting is matched in such a way that there are no jerks when shifting parking on a slope you should first apply the handbrake firmly and then move the the gear and the power transmission of the engine to the front wheels is not selector lever into position P. This is to ensure that there is no excessive pressure acting interrupted. on the lock mechanism and that it is easier to subsequently move the selector lever out of position P. Information for driving with the automatic gearbox DSGIf the selector lever position N is selected by accident while driving it is first necessary Shifting up and down through the gears is performed automatically.to release pressure on the accelerator pedal and wait for idling speed of the engine to be reached before engaging a drive position in the selector lever. You can also, however, switch the gearbox over into the Tiptronic mode. This mode makes it possible for you to also shift gears manually  page 123.WARNING Starting-off and Driving  Do not depress the accelerator when changing the position of the selector lever if the car is stationary and the engine is running - risk of accident! – Depress the brake pedal fully and keep it depressed. Never move the selector lever into position R or P when driving - risk of an – Press the Shiftlock button (button in handle of the selector lever), move the accident! selector lever into the desired position, e.g. D  page 121, and then release the  If you are stopping at a hill (downhill section), never try to hold the car Shiftlock button. stationary with the gear engaged by means of the “accelerator”, this means by – Release the brake pedal and depress the accelerator .letting the clutch slip. This can lead to ov erheating of the clutch. If there is a risk of overheating of the clutch due to overload, the clutch is opened automatically Stop and the vehicle rolls backward - risk of accident! – The selector lever position N does not have to be selected when stopping just for  If you must stop at a slope, depress and hold the brake pedal, so that you can a short time, such as at a cross roads. It is sufficient to hold the vehicle stationary prevent the vehicle from rolling back. using the foot brake. The engine can, however, be allowed just to idle. Parking – Depress the brake pedal and hold it depressed.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders