owners manual Hyundai Genesis

owners manual Hyundai Genesis - year of production: 2008, 2009, 2010, 2011, 2012, 2013 - Hyundai Genesis I 1 owners manual EN

Document: pdf (9.02 MB) 399 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Hyundai Genesis, year of production 2008 - 2013:

Features of your vehicle ® ® Gate operator & Canadian program- Erasing HomeLink buttons Reprogramming a single HomeLink ming button Individual buttons cannot be erased. During programming, your handheldTo program a new device to a previously However, to erase all three programmed ® button, follow these transmitter may automatically stop trans- trained HomeLink buttons: mitting. Continue to press the Integratedsteps: 1.Press and hold the two outer HomeLink®Wireless Control System but- 1. Press and hold the desired HomeLink ® HomeLink® buttons until the indicator ton (note steps 2 through 4 in the button. Do NOT release until step 4light begins to flash-after 20 seconds. Standard Programming portion of this has been completed. 2. Release both buttons. Do not hold for document) while you press and re-press ("cycle") your handheld transmitter every 2.When the indicator light begins to flash longer than 30 seconds. slowly (after 20 seconds), position the ® The Integrated HomeLinkWireless two seconds until the frequency signal handheld transmitter 1 to 3 inches Control System is now in the training has been learned.The indicator light will ® flash slowly and then rapidly after sever- away from the HomeLinksurface. (learn) mode and can be programmed at al seconds upon successful training. 3. Press and hold the handheld transmit-any time following the appropriate steps ® ter button. The HomeLinkindicator in the Programming sections above. light will flash, first slowly and then rap- ® Operating HomeLink idly. To operate, simply press and release the 4.When the indicator light begins to flash ® programmed HomeLinkbutton. rapidly, release both buttons. Activation will now occur for the trained 5.Press and hold the just-trained ® device (i.e. garage door opener, gate HomeLink button and observe the red operator, security system, entry door Status Indicator LED. If the indicator lock, home/office lighting, etc.). For con- light stays on constantly, programming venience, the hand-held transmitter of the device may also be used at any time. is complete and your new device should activate. 4 44

Download PDF

Click here to download a pdf file with an instruction manual for Hyundai Genesis
year of production from: 2008

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.