Nissan 370Z owners manual page 121

text version of content this owner's manual page from owners manual to the vehicle Nissan 370Z, year of production 2009:

Black plate (119,1) PROGRAMMINGTROUBLESHOOT- CLEARINGTHE PROGRAMMED IN- at: www.homelink.com or 1-800-355-3515. ING FORMATION The HomeLink® Universal Transceiver button GUID-1B5B2377-C283-42B9-A9EA-2C397935212F GUID-6DA4216E-DFC9-465B-899E-71FD869EB079 If the HomeLink® does not quickly learn the The following procedure clears the programmed has now been reprogrammed. The new device hand-held transmitter information: information from both buttons. Individual buttons can be activated by pushing the HomeLink® . replace the hand-held transmitter batteries cannot be cleared. However, individual buttons button that was just programmed. This proce- with new batteries. can be reprogrammed, see “Reprogramming a dure will not affect any other programmed single HomeLink® button” (P.2-57). HomeLink® buttons. . position the hand-held transmitter with its IF YOUR VEHICLE IS STOLEN battery area facing away from the GUID-B5C4FE99-3E55-4F23-9F53-FC833888BBDA To clear all programming HomeLink® surface. GUID-16CD3015-C6B0-48F1-9A00-C4E05260DF54If your vehicle is stolen, you should change the 1. Press and hold the two outer HomeLink® . press and hold both the HomeLink® and codes of any non-rolling code device that has buttons until the indicator light begins to been programmed into HomeLink®. Consult the hand-held transmitter buttons without inter- flash in approximately 10 seconds. Do not ruption. hold for longer than 20 seconds. Owner’s Manual of each device or call the . position the hand-held transmitter 1-3 in manufacturer or retailer of those devices for ® 2. Release both buttons. additional information. (26-76 mm) away from the HomeLink ® surface. Hold the transmitter in that positionHomeLink is now in the programming mode When your vehicle is recovered, you will for up to 15 seconds. If HomeLink® is not and can be programmed at any time beginning need to reprogram the HomeLink® Univer- with “Programming HomeLink® programmed within that time, try holding the ” - Step 1. sal Transceiver with your new transmitter transmitter in another position - keeping the REPROGRAMMINGASINGLE information. indicator light in view at all times. HomeLink® BUTTON GUID-2EBBD140-2A8E-43C2-B3D5-5EF40E441A74FCC Notice: If you have any questions or are having difficultyTo reprogram a HomeLink® Universal Transcei- For USA: programming your HomeLink® buttons, refer to ver button, complete the following. the HomeLink® web site at: www.homelink.com This device complies with Part 15 of the ® or 1-800-355-3515. 1. Press and hold the desired HomeLink FCC Rules. Operation is subject to the button. DO NOT release the button. following two conditions: (1) This device 2. The indicator light will begin to flash after 20may not cause harmful interference, and seconds. Without releasing the HomeLink® (2) this device must accept any interfer- ence received, including interference that button, proceed with “Programming HomeLink®” - Step 1. may cause undesired operation. For questions or comments, contact HomeLink® Instruments and controls 2-57 [ Edit: 2012/ 4/ 11Model: Z34-D ]

owners manual Nissan 370Z

owners manual Nissan 370Z - year of production: 2009 - Nissan 370Z owners manual EN