or
owners manual Mazda 5
owners manual Mazda 5 - year of production: 2005, 2006, 2007, 2008, 2009, 2010 - Mazda 5 I 1 owners manual EN
Document: pdf (15.02 MB) 344 pages
all ratings: 0 average rating: 5
text version of content this owner's manual page from owners manual to the vehicle Mazda 5, year of production 2005 - 2010:
2.0 MZR-CD Engine Control System
Maintenance and Repair
Replacing the engine oil
• Every time the engine oil is replaced, the parameter “Calculated oil dilution” in the PCM
must be reset with the aid of WDS. Therefore, select the optToolboxion Æ
PowertrainÆData Reset
ÆEngine Oil.
Manual regeneration
• If the DPF is blocked due to an excessive soot amount accumulated, it must be
regenerated manually with the aid of WDS. Therefore, select the option ToolboxÆ
PowertrainÆDPFÆDPF Regeneration.
• Depending on the amount of soot accumulated in the DPF the PCM automatically
selects normal regeneration mode (34 min) or long regeneration mode (60 min). Long
regeneration mode is performed when the soot accumulation rate exceeds 125 %. Due
to the longer duration the manual regeneration can be performed at a lower exhaust gas
temperature. As a result, damage of the DPF by a violent regeneration following an over-
accumulation of soot is prevented.
• In order to cancel the manual regeneration process perform the following procedure:
1. Depress the clutch pedal, shift to 1st gear and verify that the engine speed
decreases t .
o idle speed (manual regeneration is cancelled)
-1
2. Shift to neutral and increase the engine speed to 3000 min for 1 min (DPF is
cooled).
3. If the manual regeneration must be performed again, wait for approx. 5 min before
re-starting the regeneration process.
NOTE: Always perform the manual regeneration in a well-ventilated place and use an
appropriate exhaust-gas extraction system. The vehicle should also not be parked in
front of any flammable or low heat resistant material, since high temperature exhaust
gas is emitted during this process. In addition, the hood should be opened to prevent
the engine from overheating. Do NOT apply electrical load (such as turning on the
headlights or rear window defroster) during manual regeneration, since the post
injection amount is changed and regeneration may not be performed correctly.
Service Training Mazda5 01-95
Download PDFClick here to download a pdf file with an instruction manual for Mazda 5
year of production from: 2005
Do you prefer pdf format?Find out how to download
Enter the code to download PDF file:
:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Mazda 5 I 1 owners manual
pages 114 - 120
pages 114 - 120
Mazda 5 I 1 owners manual
page 117 / 344
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDFOther available language versions of this manual:
- Mazda 5 I 1 manuel du proprietaire FRshow the owner's manual
pdf - 4.67 MB
Others owner's manuals for this model:
Mazda 5 2005 - 2010 FR - Mazda 5 I 1 manuel du proprietaire - pdf - 4.67 MB
Mazda 5 2010 - 2015 FR - Mazda 5 II 2 manuel du proprietaire - pdf - 5.51 MB
Mazda 5 2005 - 2010 FR - Mazda 5 I 1 manuel du proprietaire - pdf - 4.67 MB
Mazda 5 2010 - 2015 FR - Mazda 5 II 2 manuel du proprietaire - pdf - 5.51 MB