owners manual Seat Leon

all ratings: 0 average rating: 5

112 Lights and visibility When the light switch is in position , the vehicle lights and the instru- Lights and visibility: functions ment panel and switch lighting switch on and off automatically in the fol- lowing situations ⇒ : Parking light When the parking light is switched on, (right or left turn signal), the front Automatic switching on: Automatic switching off: side light and the rear light on the corresponding side of the vehicle stay lit. The photo sensor detects darkness,When adequate lighting is detected. The parking lights can only be activated with the ignition switched off and for example, when driving through a the turn signal and main beam lever in the central position, before being tunnel. triggered. The rain sensor detects rain and ac-When the windscreen wipers have Parking light on both sides tivates the windscreen wipers. been inactive for a few minutes. With the ignition switched off and the light switch in position , when lock- 1) Cornering lights* ing the vehicle from the outside, the parking lights on both sides of the ve- hicle light up. In doing so, only the side lights of both headlights light up,When turning slowly or on very tight bends, the cornering lights are activa- and additionally the tail lights will do so partially. ted automatically. The cornering lights may be integrated in the fog lights and are switched on only at speeds of less than 40 km/h (25 mph). Daytime driving light* When reverse gear is engaged, the cornering lights on both sides of the ve- The daytime driving lights consist of individual lights, integrated in the front hicle switch on, in order to better illuminate the area for parking. headlights. With the daylight driving lights on, only these lights switch on ⇒  . Motorway lights* The daytime driving lights switch on every time the ignition is switched on,The motorway light is available on vehicles equipped with full-LED lights. if the switch is in positions  or , according to the level of exterior light- The function is connected/disconnected via the corresponding Easy Con- ing. nect system menu. When the light switch is in position , a light sensor automatically ● Activation: When going above 110 km/h (75 mph) for more than 30 sec- switches dipped beam on and off (including the control and instrument onds, the dipped beam raises slightly to increase the distance of visibility of lighting) or the daytime driving lights depending on the level of exterior the driver. lighting. ● Deactivation: When reducing the speed of the car below 100 km/h, the Automatic dipped beam control  dipped beam returns to its normal position.  The automatic dipped beam control is merely intended as an aid and is not able to recognise all driving situations. 1) This function is not available on vehicles equipped with full-LED headlights.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders