owners manual Skoda Yeti

all ratings: 0 average rating: 5

s2ug.6.book Page 107 Friday, April 9, 2010 2:24 PM Heating and air conditioning system 107 Using the system Both other pre-set times can be programmed and stored in the same way. So that the auxiliary heating (auxiliary heating and ventilation) func-If you select the menu Activate after setting the desired values, appears in the display tions according to your expectations, it is necessary to carry out the Pre-set time (weekday, hours, minute) activated. and the set pre-set time is active. basic setting before its programming. Only one programmed pre-set time can be active. Basic setting The last programmed pre-set time remains active. – On the information display, select in the Main menu the menu point After the auxiliary heating activates at the set time, it is necessary to pre-set a time Aux.heating. again. – In the menu Aux.heating select the menu point Weekday and set the current day.Changing the active pre-set time is carried out after selecting the menu point Activate in the menu Aux.heating (auxiliary heating) by selecting a pre-set time. – By selecting the menu point Back, you will reach in the menu Aux.heating.The prerequisite for the correct switching on of the auxiliary heating (auxiliary heating – In the menu Aux.heating select the menu point Running time and set the desired and ventilation) according to the programmed pre-set time is the correct setting of the running time in steps of 5 minutes. The running time can be 10 to 60 minutes.current time and the weekday page107. – By selecting the menu point Back, you will reach in the menu Aux.heating.If the system is running, a warning light in th e button for direct switching on/off of the – In the menu Aux.heating select the menu point Mode.auxiliary heating  lights up. – In the menu Mode select the desired mode Heating for or Ventilation for.The running system deactivates after expiration of the operating period or is deacti- vated earlier by pressing the button for direct switching on/off of the auxiliary heating Programming  page106. A random pre-set time can be deactivated by selecting the menu point Deactivate in For the programming of the auxiliary heating (auxiliary heating and ventilation) in the the menu Activate. menu Aux.heating (Aux.heating) there are three pre-set times:After selecting the menu Factory setting in the menu Aux.heating, it is possible to  Pre-set time1 return to the factory setting.  Pre-set time2  Pre-set time3 In each pre-set time, the day and the time (hour and minute) can be set for switching on the auxiliary heating and/or ventilation. An empty position can be fo und between Sunday and Monday when selecting the day. If this empty position is selected, the activation is performed without taking into account the day. If you leave the pre-set menu by selecting the menu Back or do not make changes on the display for longer than 10 seconds, the set values are stored, but the pre-set time is not active. Using the systemSafety Driving Tips General MaintenanceBreakdown assistanceTechnical Data

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders