owners manual Nissan 350Z

owners manual Nissan 350Z - year of production: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 - Nissan 350Z Fairlady Z owners manual EN

Document: pdf (3.52 MB) 297 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Nissan 350Z, year of production 2002 - 2009:

position the hand-held transmitter 2 to 5 inaway from the HomeLink surface.two conditions: (1) This device may not (50 to 127 mm) away from the HomeLink3. Press and hold the hand-held transmittercause harmful interference and (2) This surface. Hold the transmitter in that positionbutton. device must accept any interference that for up to 15 seconds. If HomeLinkis not may be received, including interference programmed within that time, try holding the4. The HomeLink indicator light will flash, firstthat may cause undesired operation. transmitter in another position - keeping theslowly and then rapidly. When the indicatorThe transmitter has been tested and com- indicator light in view at all times.light begins to flash rapidly, release bothplieswith FCC and DOC/MDC rules. If you continue to have programming difficulties,buttons. Changes or modifications not expressly please contact the NISSAN Consumer AffairsThe HomeLinkUniversal Transceiver buttonapprovedbythepartyresponsibleforcom- Department. The phone numbers are located inhas now been reprogrammed. The new devicepliance could void the user’s authority to the Foreword of this Owner’s Manual.can be activated by pushing the HomeLinkoperate the device. CLEARING THE PROGRAMMED button that was just programmed. This proce-DOC: ISTC 1763K1313 INFORMATION dure will not affect any other programmed HomeLink buttons. FCCI.D.: CB2V67690 Individual buttons cannot be cleared, however toIF YOUR VEHICLE IS STOLEN clear all programming, press and hold the two outside buttons and release when the indicatorIf your vehicle is stolen, you should change the light begins to flash (approximately 20 seconds).codes of any non-rolling code device that has REPROGRAMMINGASINGLE been programmed into HomeLink . Consult the HomeLink BUTTON Owner’s Manual of each device or call the manufacturer or dealer of those devices for To reprogram a HomeLinkUniversal Trans-additional information. ceiver button, complete the following.When your vehicle is recovered, you will 1. Press and hold the desired HomeLink but-need to reprogram the HomeLink Univer- ton. Do not release the button until step 4sal Transceiver with your new transmitter has been completed. information. 2. When the indicator light begins to flashFCCNotice: slowly (after 20 seconds), position the hand-This device complies with FCC rules part held transmitter 2 to 5 in (50 to 127 mm)15. Operation is subject to the following 2-46 Instruments and controls 05.10.18/Z33-D/V5.0

Download PDF

Click here to download a pdf file with an instruction manual for Nissan 350Z
year of production from: 2002

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.