owners manual Peugeot 4007

all ratings: 0 average rating: 5

DRIVING Pr ess the brake pedal fi rmly At low speeds, when approaching a The gearbox engages the gear re- while starting the engine. stop or traffi c lights for example, the quested if the engine speed permits it. gearbox changes down to fi rst gear The gear engaged appears. automatically. To return to the automated mode, press Start the engine. " N" appears on the the back of the "+/OFF" control for instrument panel display. Sw itching to automated mode approximately 2 seconds. Select fi rst gear (position D or +/ - ) or re- A utomated mode Sto pping the vehicle verse (position R ). After using the sequential mode, you Release the handbrake. can return to the automated mode by Before switching off the engine, you Release the brake pedal then accelerate. selecting position D . can: " D" or "1" or "R" appear on the instru- " D" appears on the instrument panel - move to position N to leave the ment panel display. screen. gearbox in neutral. The gearbox then operates in auto- - leave a gear engaged, such as fi rst active mode, without any action on the or reverse. Sto pping - Starting on a slope part of the driver. In both cases, you must apply the park- It continuously selects the gear most ing brake to immobilise the vehicle. D o not use the accelerator pedal to suited to the conditions of: immobilise the vehicle on a slope, - driving style, O perating anomaly apply the p arking brake instead. - road characteristics, 7 When starting on a slope, accelerate - vehicle load. With the ignition on, if the message gradually while releasing the parking To optimise driving comfort and obtain "Slow down" or "Maintenance re- brake. the most suitable gear, avoid sharp vari-quired" appears on the multifunction ations in the pressure on the accelerator screen, this indicates a gearbox mal- pedal. function. Sw itching to sequential mode When a message is displayed, carry Once you have moved off, you can A uto sequential mode out the following operations: switch to sequential mode by selecting In the automated mode, you can take - slow down and stop your vehicle in position +/- . over control temporarily at any time a safe place, " D" disappears and the gears engaged using the steering mounted controls. - place the lever in position N and let appear in succession on the instrument The use of these controls permits manual the engine run, panel screen. selection of the gears in situations which - open the bonnet to allow the engine The gear change requests are only car-require a faster changedown than that to cool. ried out if the engine speed permits it. offered in automated mode (arrival at a If the message disappears for a long Take your foot off the accelerator pedal roundabout, exit from a car park with a period, you can set off again. gently to engage the gear. steep gradient, overtaking.). If the message remains displayed or ap- pears frequently, contact a PEUGEOT dealer without delay.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders