Nissan Patrol Y61 GR owners manual page 106

text version of content this owner's manual page from owners manual to the vehicle Nissan Patrol, year of production 1997:

.'{, CAUT ION: TO SHIFT SHIFT PROCEDURE FOR MANUAL-LOCK FREE-RUNNING HUBS TRANSFER CASE: po si • Never drive or "4L" in 4WD ("4H" 1. Stop the vehicle. tion) with bs in the the free- running hu ) Od- 2. Set free - running hubs in the LOCK position. F o m "2H" to "4H" r Move the shift lever to 5 FREE position . 3. transfer "4H", This can be done at any speed up to 80 km/h ( 0 MPH) and it is not necessary to depress the clutch l. i peda Pe orm this operation when driving straight. • Do not driv the left e you r vehicle with Move the, transfer shift lever to "2H'. This can be done at any speed up to 80 km/h ( 5 0 MPH) and it is not necessay to depress the clutch pedal (manual . � and right free- set to dif /'\ : running hub s transmission models). Periorm thiS operation when driVing straight. F ro m "4H" to "2H" NOTE: ferent positions. For 2WD operation, set the free -running hubs in the n. FREE positio This will allow for better fuel economy, qui eter ride and less component wear. '. • For the fist 500 km (300 mile s) it is 1. Stop the vehicle. ommended rec that you driv e in 2WD 2. Depress the clutch pedal (On automatic transmission models, put the selector lever in the "N" position). 1 ("2H" position), with the free-ru nning 3. Depress the transfer shift lever and move it to the desired " 4L" or "4H" position. NOTE: hubs set in the LOCK position. ro m "4H' or "4L" to "4L' or On automatic transmission models, do not leave the lever between the "4H" and F transfer shift "4L" positions. Stopping in this position may "4H " cause gear grinding when selecting another gear. Changing case gear quickly and transfer smoothly will elimin ate this. If the transfer case is SD0022-A • To ensure proper lu brication of front left in "N" for more than a few seconds and you have difficulty selecting another gear, turn off the engine, make the gear selection and re start the engine. dr ive compone nts, drive in the LOCK CAUT ION: . MAN UAL-LOCK FREE -RUNNING position for at least 16 km (10 mi les) With the engine running, do not place the transfer case ttempt to select "P" in the in "N" and a transmission. HUB S (if so equipp ed) each month. 1. Stop the vehicle. 2. Set free-running hubs in the LOCK position. The manual-lock free-r unning hub (on the front 3. Depress the Clutch pedal (On automatic transmission models, move the transmission selector lever to the "N" position). wheels ) is designed to allow you to engage or From "2H" to "4L" 4. Depress the transfer shift lever and move it to "4L". Change gears quickly and smoothly, NOTE: disengage the front drive shaft to the front On automatic transmission models, sometimes, with the vehicle sto PR ed, the transfer shift lever will not move dir ectly from "2H" to "4L". When this occurs follow the "NOTE" shown in shifting from "4H" or "4L" to "4L" or "4H". wheels, Before driving, set the free-ru nning hub to the desired posi tion : 1. Stop the vehicle. 2. Depr ess the clutch pedal (On automatic transmission models, move the transmission selector lever to the "N" position). • For 2WD operation - Turn the knob to the Fro m "4L" to "2H" 3. Depress the transfer shift lever and move it to "2H". NOTE: FREE position. Follow the "NO TE" shown in shifting from "4H" to "2H". • For 4WD operation - Turn the knob to the LOCK position. Be sure to align the "¢" mark on the knob with the ".n mark on the wheel hub. I Starting and driving 5-25 5-2 4 Starting and d riv i ng L

owners manual Nissan Patrol

owners manual Nissan Patrol - year of production: 1997 - Nissan Patrol Y61 GR owners manual EN