owners manual Seat Toledo

all ratings: 0 average rating: 5

Operation park position. This reduces the load on the Manual gearbox WARNING lock mechanism while making it easier to Never engage reverse gear when moving for- move the selector lever from position P. Changing gears ward. Risk of accident! If, while the vehicle is moving, the selector lever is accidentally moved to position N, re- Note lease the accelerator and wait for the engine Do not rest your hand on the gear lever while to idle before moving it back into position. driving. The pressure of your hand could lead to premature wear of the gear system. WARNING ● Never press the accelerator when selecting the automatic gearbox operating mode when the vehicle is stationary. Risk of accident! Automatic gearbox ● Never move the selector lever to positions R or P when driving. Risk of accident! Basic information Fig. 91 Gear shift diagram of a 5- or 6-speed ● If the vehicle is to be stopped with a gear manual gearbox The gearbox changes up and down automati-selected and the engine idling (e.g. waiting or moving slowly at traffic lights), press down cally. The gearbox can be set to Tiptronic When changing gear, always depress the on the brake pedal because the transmission mode. The gears can be changed manually in clutch pedal fully and keep it pressed down is not entirely interrupted when the engine is this mode ››› page 102. to avoid excessive clutch wear. idling and the vehicle will tend to start mov- The engine can only be started in positions P In order to drive at an optimum RPM, follow ing. or N. If, on engaging the steering lock, the gear change indications ››› page 32. ● Apply the handbrake firmly and put the se- switching the ignition on/off or starting the lector lever in position P before opening the Engage reverse gear only when the vehicle is engine, the selector lever is not in these posi- bonnet and working on the vehicle with the stopped. On engaging reverse gear while the tions, the informative display will show Move engine running. Risk of accident! Strictly fol- engine is running, first wait a moment with the selector lever to position P/N!, or  P/N islow the safety instructions ››› page 132, En- the clutch pedal pressed down fully to limit shown on the general dash panel display.gine compartment. gear shift noise. ● When stopping on a slope (hill), try not to At temperatures below -10 °C (14 °F), the en- The reverse lights switch on when the reverse stop the vehicle from moving by pressing the gine can only be started in position P. gear is selected and the ignition is on. “accelerator” with a gear selected. This could Move the selector lever to position P whenoverheat the clutch. If the clutch risks being parking the vehicle on a flat surface. On aburnt due to this force, it would switch off slope, the handbrake should be firmly ap- plied before moving the selector lever to the 100

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders