BMW M5 F10 M Power owners manual page 101

text version of content this owner's manual page from owners manual to the vehicle BMW M5 F10, year of production 2011:

Seite 101 Safety Controls After a successfully completed Reset, the All wheels green wheels on the Control Display are shown in System is active and will issue a warning rela‐ green and "Tire Pressure Monitor (TPM) tive to the tire inflation pressures stored during active" is displayed. the last reset. The trip can be interrupted at any time. If you One wheel is yellow drive away again, the reset resumes automati‐ cally. A flat tire or major drop in inflation pressure in the indicated tire. Low tire pressure message All wheels are yellow The yellow warning lamp lights up. A A flat tire or major drop in inflation pressure inCheck Control message is displayed. several tires. ▷ There is a flat tire or a major loss in tire inflation pressure. Wheels, gray ▷ No reset was performed for the system. The system cannot detect a flat tire. Reasons The system therefore issues a warning for this may be: based on the tire pressures before the last ▷ The system is being reset. reset. ▷ Malfunction. 1. Reduce your speed and stop cautiously. Avoid sudden braking and steering maneu‐ Additional information vers. The status display additionally shows the cur‐ 2. Identify the damaged wheel. Do so by rent tire inflation pressures and tire tempera‐ checking the tire inflation pressure using tures. The values shown are current measure‐ the Mobility System. Correcting the tire in‐ ment values and may vary depending on flation pressure, refer to page 182. driving style or weather conditions. 3. Repair flat tire with the Mobility System, re‐ fer to page 180, or replace the damaged Carry out reset wheel. Reset the system after each correction of the tire inflation pressure and after every tire or Required inflation pressure check wheel change. message 1. "Vehicle Info" A Check Control message is displayed. 2. "Vehicle status" Check the tire inflation pressure and carry out a reset of the system. 3. "Perform reset" In some cases, a wheel was changed without 4. Start the engine - do not drive away. having carried out a reset. 5. Carry out the reset with "Perform reset". 6. Drive away. System limits The tires are shown in gray and the status is The system does not function properly if a re‐ displayed. set has not been carried out, e.g., a flat tire is After driving faster than 19 mph/30 km/h for areported even though the tire inflation pres‐ short period, the tire inflation pressures set aresures are correct. accepted as reference values. The reset is completed automatically during driving. 101 Online Edition for Part no. 01 40 2 909 953 - VI/13

owners manual BMW M5 F10

owners manual BMW M5 F10 - year of production: 2011 - BMW M5 F10 M Power owners manual EN