manual Audi R8 I 1 owners manual page 100

text version of content this owner's manual page from owners manual to the vehicle Audi R8, year of production 2006 - 2015:

document_0900452a816e6cc9.book Seite 98 Mittwoch, 21. Februar 2007 1:32 13 98 HomeLink – Press and hold down the two outer buttons until the indi- – As you do so, watch the turn signals on your vehicle. cator diode starts to flash ⇒ page 95, fig. 80. HomeLink confirms successful programming by flashing – Then release the buttons. all four turn signals three times. – If the turn signals fail to flash three times, repeat the After the programming of the HomeLink® universal transmitter procedure with the transmitter held at a different buttons has been erased, the system will return to the training distance from the bumper. mode and is ready to be re-programmed at any time. When the turn signals have flashed three times, this means the Note device previously stored in HomeLink has been erased and the new • Programmed buttons cannot be erased individually. system programmed in its place. To activate the new system, press • For security reasons it is advisable to erase the programming of the HomeLink button that has just been re-programmed. the HomeLink buttons prior to selling your vehicle. Note Applies to vehicles: with HomeLink It may require several attempts before programming is successful. Reprogramming a HomeLink® button When programming a new device, keep the button pressed for at least 15 seconds before trying again with the transmitter in a A HomeLink button can be re-programmed individually different position. Keep watching the turn signals during that without affecting the other button allocations. time. At the operating unit Applies to vehicles: with HomeLink – Press and hold down the selected HomeLink® button Conformity certification until the indicator diode ⇒page95, fig. 80 starts flashing slowly. The HomeLink universal transmitter is registered in the following countries under the following certification numbers: At the front bumper –Hold theor iginal hand-held transmitter for the garage Country Certification number door opener or other device close to the front bumper Andorra 16SEP2003 directly below the right headlight ⇒ page 96, fig. 81. The Belgium RTT/D/X2064 exact distance depends on the system that you want to Denmark 98.3142-266 program. – Press the button on the original hand-held transmitter Germany D800038K for the garage door opener or other device. Finland FI98080106 France 97619 RD

owners manual Audi R8

owners manual Audi R8 - year of production: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 - Audi R8 I 1 owners manual EN